Saying that a developer can be 100% is completely false. You should always start with the simplest projects. before doing a complicated undertaking with this board.
This is a mini computer with which you can do thousands of productive and entertaining things. With practice, you will know that or in one . each project, It has a level of complexity and in each one you take a step to be a professional.
In this article, We leave you a series of projects at low, medium and high levelswith which you can gradually become an expert programmer.
List of the best Raspberry Pi projects for beginners that you can do yourself to learn how to develop from scratch
Although you may have a gift of genius, you will always need a guide like this to know where to start with your Raspberry Pi equipment. Check out these low complexity projects you can do at home.
Do not try to skip this section, you will be surprised by the projects that are in this list for beginners:
add power button
Why would you want to do this project? Well, Raspberry devices do not have an on or off button on their board, which is a risk to try to turn off the device by disconnecting the power, that could damage a component and cause you to lose data. The complexity is that an accessory (button) is required that can be connected and learn python which is the programming language with which you will make that button work.
LED control
This is a typical university project, in the first years of the degree, of course. It is about converting your board into a console that allows you to vary the lighting of LED lights to simulate a scenario.or, for example, the lights used on airport runways. You require a Raspberry computer, in any of its versions, learn programming (it is done with C++ or the one you prefer) and the amount of LED lights that you want.
sensor with alarm
It may not have a real utility, but will allow you to practice until you improve with a Raspberry board. We propose you create a motion sensor and that, when detecting any eventuality, it sounds an alarm. Wiring required, an infrared sensor, a GPIO panel and a Raspberry computer, regardless of whether it is discontinued, such as the Pi 1 and Pi 2 versions.
a digital frame
So that it stays up to you, a small LCD screen is required that can be connected to your Raspberry. However, as a practice you can use any type of monitor like your computer. You need a short tutorial on how to program this project in Python, a set of images, and time to do the programming that is required. And, as we told you, This frame can be both photos and videos. The limit is your creativity.
wireless printer
Perhaps this is the highest level among projects for newbies. Its utility is high because at the end you can keep your old printer and send documents to print remotely. The only thing you have to ensure is that the connection is via USB. In this case, the Raspberry becomes a local server which will receive the documents via Wifi and will ask the printer to do its job. The idea is that the printer is only connected to power, without being connected to the computer.
binary clock
This is another project that becomes almost medium intensity, because programming and additional board with 64 RGB LEDs required. This will be used to show the time with binary code, in addition, it works as an ideal practice scenario to increase the complexity of the projects.
With this idea you will obtain the year, with the last two digits. You will also have access to the month, the day and the precise time. Of course, you will have everything through LED lights that must be programmed so that they perfectly fulfill their function. Do you dare?
Learn about the best projects with Raspberry Pi for medium-level users that you can do to continue learning
After you finish all the beginner projects, then you can dare to go to the next level of complexity. You can set as a goal to do several projects, with the same device, so that you have at home and brag to your friends that this new device was made with your ingenuity. Check out this list of advanced ideas to do at home with your Raspberry PI.
These ideas will take you to the extreme of analyzing if it is really what you want to do with your life:
a media center
East it will be a and achieve reproductions on a television, which will be connected to the Raspberry via an HDMI cable. You need to learn to program and run OPenELEC for it to be feasible. It does not require a lot of investmentall it takes is an HDMI cable, a Raspberry motherboard, and a keyboard and mouse to give you access to the new media center and control what you see and hear on your TV.
pet monitor
You will say that Raspberry boards do not have an integrated camera and it is so, but you can officially purchase one from the same manufacturer. In short, when you need to see what your pet is doing, you can do it by connecting the camera and recording what she does. The connection is made via SSH and you can monitor with your smartphone what the camera is recording. The downside is that if you don’t have a motherboard, you have to buy the new version and a PiCam so there are no compatibility issues.
home firewall
This is useful when at home you have several computers connected to the same work network. It will protect you from external attacks and the best thing is that at a low cost. Physically, it only requires a Raspberry Pi. Additionally, you must have Tor for Raspberry and a Hub installed, when there are more than five or six computers connected. It only requires configuring the programs within the device and that’s it, you can be connected safely.
Google Home
This Google project is not tied to hardware, because the application fits on any device, even a Raspberry. You can prepare your team for and manage to control the smart devices in your home from a Pi. a few years ago, Google and MagPi launched a testing initiative that was made of cardboard, which shows that any device can become a command center.
FM Radio
Without intending to denigrate professional radio stations, it is easy to enter a broadcast frequency with a Raspberry Pi, a cable that serves as an antenna and Python programming. The frequencies you can enter range from 1 Mhz to 250 Mhz. Although the signal will not be extensive, you can do it by way of learning to develop projects like this and move on to the next step of complexity, all for the sake of science and your learning as a programmer.
Mail server
All that is required is a wired internet connection, a computer Raspberry Pi and a couple of programs that will help with which you can make an account work, then you can expand the number of users. Over time, you adjust security and make encryptions stronger to prevent attacks. Also, you can make your smartphone can synchronize with this serveras you would with Gmail, for instance.
The best Raspberry Pi projects for advanced users that you can do to test your knowledge
when we say that everything can be done with a Raspberry Pi, in reality it is almost everything except a time machine or a coffee maker. Nevertheless, The projects that you can carry out only with your ingenuity are variedsome cables and a Raspberry board, yes it’s from, it’s better.
We leave you a list of the most advanced projects that you can achieve if you study and practice to the fullest with the board you have in your hands:
garden alarm
This project was born as a game from a youtuber who wanted to know when people stepped on the grass when passing in front of his house. As boredom overwhelmed him, he preferred to create this alarm with a Raspberry and a horn that connects via USB.
Every time someone steps on the alarm, an infrared sensor is activated that emits an aural signal to its creator, so he could go to the window and see when people step on his lawn:
- Is a kind of artificial intelligence.
- serves for increase the security of your home.
- serves for flaunt your qualities as a developer.
PICOMputer
This is a advanced project that you can do to remember when they made the first pocket computers who did basic tasks like scheduling appointments, doing calculations, and creating mini reminder notes. They are the most distant ancestors of smartphonesbut it’s worth remembering if you want to practice with a Raspberry.
It requires a special board called the Raspberry Pico, which provides an “all in one” console with the required hardware and an integrated mini keyboard:
- with this project you will become an expert programmer.
- Maybe don’t have profitbut yes a lot of experience.
Mini iMac
This is a project that involves several things: first, 3d printing; second, advanced programming; third, adjust the components of the board (disassemble). With a lot of work and ingenuity, developer Michael Pick was able to make an exact replica of an iMac that’s no bigger than a soda can. It took the 3D printing of the monitor, keyboard and touch of this mini computer. also had to emulate the iMac interface within the Raspberry features.
In addition, he broke the board apart to get its components to fit into the 3D-printed casing:
- At this level, You can already say that you are an expert in the use of Raspberry.
- It is required of a great investment for 3D printing.
- After completing something similar to this, you can take advantage of social networks and have global respect.
VR viewer
The is an industry that generates billions of euros every year and it attracts many people who are willing to pay huge sums to have the latest accessories. However, this virtual reality project is more personal, like a challenge in life. With the support of special headphoneswhich are used in a drone, virtual reality glasses and a Raspberry computer, it is possible to emulate a scenario in which people feel like they are in an adventure.
To prevent overheating, the developer placed several heat sinks on the processor and the rest of the integrated chips:
- Graphics are not the bestbut there is functionality in the design.
- The helmet it is not connected to other components.
- It is required of a huge investment of time and resources to finish this nifty project.
supercomputer
Maybe it is not possible to do this project with a single mini computer, but it is possible to do it with more than a thousand Raspberry PI boards at the same time, mounted on a server platform. This was an innovative idea from the Oracle people and it was shown at the Oracle OpenWorld 2019, in order to demonstrate the power that these devices have when people know how to work with them. They are on a two meter high cluster and together they function as a storage place.
To complete this idea, they had to create…
Facebook Comments
Disqus