A very annoying scenario for any user is to start using your computer and realize that login is slower than normal. This may be happening due to different factors, so it is necessary to carry out some configurations to try to solve it.
All computers when turned on take a few minutes to start 100%, because they must not only boot the system as such, but also load some programs. Nevertheless, when the boot time exceeds the usual standards, there may be small inconveniences in the equipment that are hindering its proper functioning.
Therefore, we are going to teach you in this post How to speed up the startup so that it turns on faster? You will discover several very effective methods, as well as an interesting tool that will make it easier for you to detect problems with your PC.
What are the reasons for Windows 8 slow logon?
know for sure the reasons why your Windows 8 PC takes a long time to start up It’s a little more complicated than it seems.
Some of the common issues that may be hindering successful login are:
- If there is not enough space on the hard drive.
- Programs leftovers.
- old files cached and temporary.
- unnecessary programs that run at startup.
- Fragmentation of the hard drive.
- Corruption of data.
- excess of programs not used.
- Shield Configuration of feeding.
- Different antivirus programs running on the same device.
- Wide number of programs running in the background.
- lack of updates Windows.
To help solve this, there are tools designed to carry out a study of your equipment and thus indicate specifically what may be failing. For example, on the website of Microsoft you can download Microsoft Fix. It is a completely free tool that focuses on diagnose and greatly improve the performance of your system automatically. However, you should know that currently Microsoft Fix It is not available for computers running Windows 8 and 8.1.
Learn step by step how to speed up Windows 8 session startup
To solve problems related to the slow startup of your Windows 8 computer, there are several very effective and easy to perform solutions. Some are usually very obvious, while there are others that you may not have known about.
Here’s what to do to speed up Windows 8 logon:
Uninstall additional antivirus programs
An error in which many users tend to fall without realizing it, is use more than one antivirus or antispyware program at the same time. This causes the device to experience a reduction in its performance. For this reason, the ideal is select an internet security program to run on the device and, after that, uninstall the other programs.
To do this you must proceed with the following steps:
- swipe from the right of the screen.
- Click on Search.
- Write “appwiz.cpl” inside the search box.
- On the left side of the screen, tap cpl.
- Within the list of installed programs, uninstall unnecessary Internet security programs.
- reboot your team.
Close programs in the notification area that run at startup
If your computer with Windows 8 takes a long time to start, one of the causes may be that there is a large number of applications or several of them that have a high impact on the computer during its start time. Some of these programs add an icon to the taskbar, so you can easily recognize them. We recommend you stop them, so they don’t run automatically during the boot of your device.
To do this you must:
- Go to the Home screen and click on the image desk. In this way you will be able to see the icon tray.
- touch each icon to see the name of the program.
- If you want to make sure you can see them for all running programs, tap on show hidden icons.
- Open one of the programs you don’t want to run. Within its options, locate a configuration similar to that of run at startup. Proceed to select the option Off or No.
In case you want to take a look at the entire list of programs that run at startup to proceed to disable them, follow the instructions below:
- press right click on the blank area from the taskbar. then go to Task Manager.
- Select in More details in the lower left corner of the Task Manager.
- inside tab Startspecifically in the Task Manageryou will see a list of apps that start automatically every time you turn on your device.
- If you see programs you don’t want to run at startupjust click on it and go to To disable.
Keep in mind that to disable a program so that it does not start automatically during the startup of your computer, does not mean that you will not be able to use it. If want to work with it, just click on its icon and that’s it.
Change program settings
Sometimes it is not necessary to go to disable a program from starting automatically so that it does not open when you enter windows. maybe just you need to add or remove some options of it and that’s it.
To change the settings of a program you have to:
- Choose the upper right corner of the screen and move the mouse pointer down or simply slide your finger from the right of the screen.
- Click on Search.
- Write “appwiz.cpl” inside the search box.
- Tap on Applications.
- On the left side of the screen, go to “Appwiz.cpl”.
- Choose the program you want and then go to Uninstall, Change or Repair.
Clean disk errors
If your PC is a bit old, they may appear over time. hard drive errors. This causes it to get slower than normal, so it is important perform a disk check to identify and eliminate any type of errors present.
To perform a check disk, do the following:
- swipe from the right of the screen or point to the upper right corner of the screen and move the mouse point down.
- go to option Search.
- Inside the search box, type Equipment.
- Tap on Applications and then click on the team on the left side of the screen.
- Click on the drive that you want to repair, and then tap on Properties.
- Select the tab Tools.
- Within error checkingclick Search. Depending on the size of your hard drive, the process may take more or less time. If you’re prompted to enter an administrator password, type it in.
- When the check is complete, restart the device.
Defragment hard drive
If you need greatly improve the performance of any deviceone of the most recommended options is through the hard drive optimization. Previously, this option was known as Disk Defragmenterand can be run on a weekly schedule or manually.
The process to proceed to defragment the hard drive manually is:
- Choose the upper right corner of the screen and move the mouse pointer down.
- We came in Control Panel.
- Select the option of Applications Y click on the team on the left side of the screen.
- choose unit that you are going to repair and, later, go to Properties.
- Enter the file Tools. then go to Optimize and, immediately afterwards, in Optimize and defragment the drive.
- Within Condition Select the drive you are going to optimize. An important fact is that in the column of Media type you must indicate what type of unit you are optimizing.
- For determine if the unit should be optimizedclick Analyze. In case you are asked for the administrator password, enter it.
- Once windows finish the process of analyzing the unit, in the column Actual state Check if it needs to be optimized. If such a drive is fragmented more than 10%, it is recommended to optimize it.
- Click on Optimize.
Some important aspects to take into consideration to optimize a hard drive is that the process may take a few minutes. Other than that, it is not possible to update network drives and if the drive is not showing in the section Optimize drives, there may be an error. In these scenarios, it is best to first repair the drive and then optimize it.
If you want to change the optimization schedule, follow the instructions below:
- Go to the top right corner on the screen and move the pointer down.
- Go into Search and when it opens, write Equipment.
- Choose Applications and click on Equipment on the left side of the screen.
- Click on the drive to repair and then tap on
- go to Tools / Optimize and defragment drive.
- Enter in Change settings. You can then select any of the following actions:
- Disable scheduled optimization: clear the Run on a schedule check box.
- Modify scheduled optimization frequency: click the dropdown next to Frequency. Followed by that, tap on Daily, Weekly, or Monthly. By default there is the weekly optimization option, and this is executed during automatic maintenance.
- Select drives you want to include or exclude in scheduled optimization: go to Select next to drives and select or clear the check boxes, then tap OK.
clean hard drive
To remove unnecessary files that are stored on the drives, it is best to clean hard drive of temporary files and system files, empty the Recycle Bin and delete all those elements that you do not need.
To clean the hard drive you have to:
- Go to the top right corner screen and move the mouse pointer down. then enter Search and write in the box search Free up disk space.
- Go into Setting.
- Click on Free up disk space by deleting unnecessary files.
- inside the list units, select the one you are going to clean.
- Tap on To accept. Finally, select Delete files.
In case you are going to clean the system files that are associated with your account, you must follow the instructions below:
- inside the list units, select the drive you want to clean. Tap on To accept.
- In the dialog Disk Cleanuptap on Clean system files.
- on the tab More optionsyou’ll get two additional options to free up space:
- Programs and characteristics: This option opens programs and features in the Control Panel, where it is possible to uninstall those programs that are no longer used. in the column of Sizeyou can visualize how much space each of them uses.
- System Restore and Snapshots: this feature uses restore points to restore…