【Install MacOS on Windows 10】Step by Step Guide ▷ 2022

Many users would like use the well be for your safety or for some tools you have. But they find themselves with the limitation that your computer is configured with and they don’t have the resources to buy another one.

The good news is that, although it is not the most appropriate or at least what the company would like, There are methods that make it possible to use MacOS on a Windows machine. and get the most out of all the applications of Manzana, building what is known in the computing world as hackintosh.

There are several methods to achieve the goal of using MacOs on Windows and here in this tutorial they are explained in a simple way, along with the benefits of doing so and the features that the computer must have.

Benefits of using MacOS on Windows

Each operating system has its particular characteristics.However, there are those who consider that macOS is better than Windows, because it is more intuitive, easy to use, and once the equipment is purchased you can work on it immediately.

Other benefits it has are the following:

Improve productivity: there are simple and specialized programs that increase creativity in tasks.
Fewer security concerns: the number of viruses is less than that of Windows, and frequent updates limit gaps that could compromise stability.
It is compatible with other services: you can open files or files created in third-party operating systems without major problems.
simple interface: Although at first the change may seem overwhelming, you easily adapt to the new visual configuration.
Higher performance: the combination of hardware makes it possible for the system to be better optimized and can function properly in multitasking mode.

Requirements to install MacOS on a PC

It is important that you keep in mind that for the operating system to work in the best way, The computer you are going to use must meet the following minimum requirements or else the new installation will become a permanent headache.

Let’s see next:

Count on a 64-bit processor, it is very likely that it will not work with one of 32, the best thing is that it is i5 or higher.
A dedicated graphics card that helps applications run without any inconvenience.
A hard disk with enough available space, as much as possible. An alternative is to use a removable one, but it is recommended that it be the main one.
At least 8GB of memory on the computerif they are 16 it is much better.
Be sure to have a removable USB stick for data transfer.
And finally, what the operating system you are going to install is updated and compatible with your computer.

Find out how to install macOS on a PC

Once you’ve made sure your computer meets the basic requirements and you’re convinced to install, it’s time to take the time to follow the steps below:

Download the operating system

Downloading the MacOS operating system is completely free as long as own an Apple account. You will do this from the application store where you will look for the most recent version. In case you do not have it, you have to talk to someone who will provide you with the file with which you will create the bootable USB. This step is key, since it is necessary to use the original software It will give less inconvenience during the installation process and it will come free of any virus.

Have an installation manager on hand

The only way for the process to work on Windows is to use an installation manager, since it is impossible to do it directly. There are several alternatives available, but here the recommendation is with unibeast, which can be downloaded from this site tonymacx86.com. right there is a list of tools that you can add to your computer, as well as some useful components. Try some configuration to see if the BIOS of your machine is compatible and avoid any inconvenience later.

configure settings

Being sure there are no issues, open the drive and go to “Partition” so that a single space is left occupying the capacity of the USB device.

Choose the correct format for MacOS and proceed to the respective format:

next, open the Unibeast program that you downloaded earlier.
In the first window that opens, select the flash drive storage for installation.
Follow the steps on the screen and Choose the version of MacOS to install.
Select a type of graphics cardthis in case the equipment is not from the newest generations of Intel.
Click on “Continue” and the program will carry out the installation process on the USB memory.
In about one houryou will have the removable memory ready and at the end of the process it will be ready to continue with the next step.

installation begins

When the computer tells you that everything has already been installed on the removable USB memory, it is time to take the steps described below:

Connect the USB memory to the computer and restart it.
To the turn on againit will give you the option from which you want to start and you will select “External”.
If the selection does not appear automatically, do it manually by entering “Disk Utility”.

Check out that you go to install the appropriate version of macOS and that in the partition table everything is correct.
If everything is perfect, click on “Format” or “Delete”.
You will see the available option to make the selection of the installation disk and, when checked, Do you expect all the steps to be completed? automatically.

At the end, touch to restart the computerbut still don’t remove the usb stick.
When you turn it back on, it should show the Apple operating system and what you have is that make basic settings following the steps displayed on the screen.
So you will have macOS ready to use it on your computer with Windows 10.

Learn how to use macOS on Windows 10

However, if you do not want to install the operating system directly on your computer, You have other options that you can use, including doing it from a bootable USB, using two operating systems or, in the last case, using a virtual machine.

Each one is explained in detail below:

From a bootable USB

Install an operating system and boot it from the usb stick has become one of the main alternatives in the present moments.

If we do it with MacOS, we will have it to use it on a Windows computer by following these steps:

Download the official image from the app store. If you don’t have an account, ask someone else to do it for you.
When you have the installer, you will see the file “Install macOS 10.15.”
Select the option “Show package contents”.
Find the file “InstallESD.dmg”save it to your desktop and then convert it to an ISO image.

Create an image using this tool:

With this, you will have an image to use it in usb sticks.
In the space called “Select the USB driver to be processed”, You are going to select the flash drive that must have a minimum of 16 GB.
Now you will see the action “Select the action to be performed on the selected USB drive” and you must activate Write image to USB drive.
Next, it appears “Select the image”tap on “Browse” and select the place where the ISO image is.
Choose one of the additional options that appear and click Write and then in “And it is”.

The process will begin, which you must confirm by clicking on “Yes”.
At the end of the process, you select “Okay”.
Thus, USB image is ready to use.

Use two operating systems

Although no computer prevents you install two operating systemsthe process is usually a bit complicated.

There are several ways to do it and here we explain at least three of them:

With dual boot: you will create two partitions on the hard drive and when starting select which one you want to run.
using live: in this case you will not load the operating system, but you will run it from RAM memory.
Emulate the system: you load an operating system without having to install it directly with which you can use any tool or application.

With a virtual machine

exist several among them are Xen, Virtualbox, VMWare or Quemu, which similarly meet the objective. As in the previous steps, the installer is required macOS.

Once you have it, follow these steps:

Download one of the programsin this case the example will be with VirtualBox(virtualbox.org)which is completely free.
One time downloaded, install it on your computer.
In the top menu, select “New”.
Complete the form putting all the data
Check the option next to configure each step.
select memory that you want to assign to the new virtual machine.
Indicates the amount of hard disk that you will be using, at least 20 GB is recommended.
Choose “Following” and in a few minutes the machine will be ready to be used.
Modify any parameter that you want according to your tastes.
Now, select the MacOS ISO image that you have downloaded
Follow the steps shown on the screen and in the end you will have the operating system ready to be used on your Windows 10 computer, without many complications and loading any tool you need to use.

as you saw, having both operating systems is not impossibleYes, you have to take each of the steps properly.