During the last years, the most used electronic devices are tablets; a fusion between a mobile phone and a computer, with a touch screen and good image quality. It is a device that integrates different functionalities: portability, autonomy, versatility, power, multimedia station, etc. Therefore, most people, worldwide, choose to use them for greater comfort, and thus They have become one of the most used gadgets in everyday life..
Tablets have a fixed battery and this is a problem when they are locked, because it cannot be removed as it is with mobile phones. In this way, many people go into despair trying to manage this and be able to turn it off and on normally. Therefore, the need arises to have full knowledge about how to reset this type of device and later restore the system to factory settings.
In view of this, below we present how to obtain this task correctly and in extremely simple steps. So that you can continue enjoying your tablet with the Android operating system in perfect condition.
Steps to reset and format an Android tablet and return to factory settings
Make a It can be complicated for many people and because of it, they end up hiring someone “expert” to get your tablet back. But this can be put aside, since it is a very simple topic that you will be able to execute yourself from the comfort of your home.
Indeed, we present you with several alternatives so that you are not afraid of formatting your Android tablet:
Insert a pin through the hole of the device
This method to restart a tablet seems a bit strange, but it is quite useful and easy. Since they contain a safety reset mechanism which lies in a kind of hole, through which it is possible to activate an integrated restoration button that it has inside it.
You just have to take into account that said button cannot be pressed just like that; It should be used in a case of extreme security. If you use it a lot, you will end up damaging it.
Now, the way to press it is with the help of a pin, a needle, a toothpick or any object that has the same size of the hole. Then enter it and make sure that this object click. With this, you will have it reset and ready to use.
Wait for the battery to run out
Most people when they see that their tablet is locked, are alarmed more than necessary and end up doing what they really shouldn’t do. Since the best and easiest solution is wait for the battery to completely drain. During this waiting time, you must not touch anything. Keep in mind that it may take a few hours.
Then, place the device to charge in any socket in your house and when the charge resumes, the tablet can be turned on in its usual way. Do not forget that on several occasions, the remedy is simpler and more effective than it seems.
Press the power button for 5 consecutive seconds
Perhaps you may have noticed that when you hold down the power button on your computer for more than 5 seconds, it suddenly shuts down. Which has also been integrated into the android operating systems at present, due to the fact that more and more mobile phones have a non-removable battery. Consequently, this is the only way to force reboot in such cases.
To execute it is very simple; hold for 5 seconds approximately the power button and at once you will be able to observe how the tablet turns off, and then turn it on as usual.
Reinstall via a computer
In many cases, people want to leave the tablet completely clean, that is, directly delete all the content on it. What can be achieved from a computer, using programs such as “odin” either “Sp Flash Tools”, which vary depending on the brand of Android tablet. In the case of those that come from China and come with mtk processorit is appropriate to use Sp Flash Tools.
In this sense, the operation of these programs is based on install a rom that you have downloaded directly from the Internet to the device. Then you will get a fully optimized, removing files such as root and viruses that may exist in the Android system partition; a clean ROM takes care of erasing everything, even invasive advertising.
Restore from PC with Universal ADB Helper
To make use of this method, you just have to connect the Android tablet to the computer with the USB cable. Then, wait for the driver installation to finish, previously established. Thus, you can run the Universal ADB Helper tool, where the option “Reboot” and then the option “Bootloader”. That is when you can press “Factory Reset” via “fastboot”.
The best thing to do when using this solution is to start the device in “Bootloader” using the USB cable and inside it Helpersink the number 9 to test the tool factory reset.
Make use of the recovery menu
This is a very advantageous function that Android contains. The recovery menu It refers to a kind of interface that is started before starting the device and works especially to repair the errors that it may present.
If you want to start the recovery menu, you have to turn it off and then hold the power button and the volume down button, that is, it runs with a button combination; just like when you are going to take a screenshot.
next, You will see how the recovery menu starts and shows a lying android figure. After that, you must sink in the section where it says “wipe data factory reset”, being the way in which we proceed to eliminate this division and restart the tablet to default values. So you can use it in perfect condition.
Facebook Comments
Disqus