【 CONFIGURE TP-Link Extender 】 ▷ Step by Step Guide ▷ 2022

One of the most important things today is to have a fast internet connectionand especially when the majority of devices are used through this network, as they are Smartphones, Tablets, consoles, Smart TVs, laptops and desktop computers. That is why it is so important to have a good wireless network connection which will allow you to enjoy the best services on your devices.

However, it is very likely that in your home or office there are places where the wireless network signal does not reach or is simply too slow, thus preventing you from using it correctly. This is one of the most common problems and one that has surely happened to most of the users. Because of this, different devices that are capable of solving these problems providing coverage to those places where it did not reach before.

These devices are known today as the repeaters and have as main function take the signal of the wireless network that it receives from the modems to reissue it with much more intensity and power thus allowing to expand WiFi coverage inside the home or office. Because of this, here we are going to show you how you are going to configure these amplifiers so that you can .

Manual to configure the Wi-Fi amplifiers TL-WA854RE and TL-WA850RE correctly

These amplifiers have as main function power send WiFi coverage where the main access point can’t reach, with the aim of being able to improve the signal in all areas of the house. A repeater will simply take care of receive the wireless signal from the host computerIn this case, it would be the fiber optic or ADSL router and once it receives this coverage, it takes it and sends it with much more power so that it can cover all areas of the house, including those where the signal did not reach before.

These devices are very easy to use and also very practical, all they need is be connected to an electrical outlet to start working. In addition, they must be placed in strategic sitesthat they are not too far from the router and that they send the signal to areas where it is generally very bad or does not reach.

It is important to note that before starting to use the amplifiers it will be necessary to configure it with your wireless network so they can work properly. In such a way, that here we will explain how to configure the Wi-Fi TL-WA854RE and TL-WA850RE in a correct way, To do this, just follow these steps:

Configuring the TL-WA854RE and TL-WA850RE amplifiers

As we previously explained the TL-WA854RE and TL-WA850RE are specifically about a wireless network range extender. One of the advantages of this device is that it works with all Internet operators. Therefore, you will not have any problem when acquiring it to improve the intensity of your network.

Currently TP-Link Extender extenders are the best sellers on the market and this is due to its good functioning. In addition, they are characterized because their configuration is usually simple and fast. It is important to mention that both devices are configured in a similar way and there are different methods to do so, just follow the steps that we will explain below:

Via “WPS” button and “Range Extender”

• To start this whole process, you will need to verify that your Internet company’s router is equipped with the system. “WPS”. To do this, you will need to check if the equipment has the “WPS” button
• When this button has already been located on your computer you have to connect the TP-Link amplifier to a power connector closest to the router already installed on your computer.

• Now you will have to waitThe extender is finished turning on completely.
• After a few seconds of ignition, press on the “WPS” button of the WiFi router for three seconds As minimum. Then you must release it and quickly click on the other button Range Extender of the WiFi equipment either TL-WA854RE or TL-WA850RE and it is left pressed for another three seconds.
• When all this process of pairing with your routerthen you can unplug from the outlet where it is connected. Now you can move it to the place where you want to place it permanently.
• It is generally recommended install it in an intermediate point of the house, that is between the location of the router and the areas of the house that have more problems for the Internet signal.
• To confirm that the wifi extender It is well configured the computer lights that appear in a circle must be on, This will tell you that it has been installed correctly.

• If its installation has already been completed completely, the equipment should start to work correctly. To do this, you can situate yourself in the places in your home where Wi-Fi signal had bigger problems, and with the help of your Smartphone, Tablet, laptop, among other equipment you can verify this connection. In this way you will realize if it works quite quickly or the signal remains the same.

In the event that your team do not expect the “WPS” button you will have to perform this configuration through another method, in this case it is configuration via browserTo do this, you will need to perform these steps:

Through the browser without the “WPS” button

• To start you will need to connect the equipment TL-WA854RE or TL-WA850RE to an outlet near the main access point. Once connected you have to wait a few seconds while the equipment starts flashing.
• The next thing will be to connect the equipment to the computer, this can be done through two options, either by Ethernet cable or wirelessly.
• If you have chosen to connect via the ethernet cable you will need to disconnect the computer from any wireless network to which it may be connected.
• Now connect the WiFi extender to the computer by the ethernet cable.
• If you choose to connect it wireless, you must disconnect the wired connection. Click on “Quot: Wireless network connection” on your desk.
• Click on the icon “To update” and connect the extender. The factory name of the equipment is: TP-LINK_Extender_XXXXXX.
• Once you have done either of these two ways, you just have to continue with the following steps:
• In the navigation bar of your favorite browser you are going to write tplinkrepeater.net and you press “Enter”.
• Over there A page will open with several methodsYou must choose the one that suits your needs. Once you have chosen one of the two options, you will be asked for one. password and a usernamein both boxes you must place “admin” without the quotes.
• When you have logged in, a page will appear. “Quick setup”.
• Selection the WiFi network of the router / AP.
• Now write the WiFi password of your main router / AP. This can be copied from the main router or modified by a new one.
• Once you have finished the configuration, you need to check the LED lights, they indicate the intensity of the signal. If the configuration has been correct, the lights will turn on.

• When the extender is correctly configured, all that remains is to locate it at a fixed point where it can distribute a signal to all parts of the house, in order to obtain the best signal and coverage. When it is reconnected to the mains socket, only wait about 30 seconds for it to start working.

Configure the TP-Link repeater through the browser

This method can be used in the case that WPS has not worked. To perform this step you must follow these instructions:

• connect the repeater to the power outlet right next to the router.
• Turn on the computer and start .
• Now you must establish a connection with the computer network, this must have a name similar to “TP-Link_Extender_2.4GHz”.