If you are a cyclist or are entering that world, this app provides you with a bike gear calculator so that you can get the full potential of your bike’s developments.
Can’t you figure out the gears on your bike? This app is one of those that we can download on our iphone. It provides you with all the data on the developments that your bike can offer.
Are you, like me, who don’t know how to go up a hill? Do you not know how many meters you advance with a specific development? Do you want to know the speed you can reach with the large chainring of your bike and the small sprocket? ?… All this data is provided to you by this great and useful app to road cyclists and of Mountain Bike.
With a simple configuration, entering some information about your bicycle, you will be able to get all the use you want from it and learn much more about this two-wheeled vehicle that so many fans have.
Bike Gear Calculator gear ratio Don’t think that it is very difficult to understand. It is true that you should know the number of teeth your chainrings and sprockets have and the diameter of your wheels. Just by knowing this you will be able to get oil out of your bike with this bicycle gear calculator.
How this bicycle gear calculator works:
It is very simple although at first glance it seems very complex. The only thing we have to do, as soon as we download it, is know how many teeth our chainrings and our sprockets have, in addition to the diameter of our rim and the length of our pedal crank. These will be specified on the bicycle and if not, you will have to measure them or visit the website of your bike brand.
We can configure all this information from the top of the screen, where chainring They are the teeth of the plate, Sprocket They are the teeth of the pine nuts, Cadence/RPM is the pedaling cadence per minute and km/mile These are the km that we want to calculate that it would take to travel when configuring all of the above.
We must also enter the length of the tire (Tire Size) and pedal crank length (Crank Length). This is added from here…
After this, we now have to combine plates and sprockets in this upper area of the screen, to see the speed, the time it takes to travel the Km that we specify, the distance of each pedal stroke… with a certain cadence or vice versa. (the cadence is configured from Cadence/RPM, which is the pedal strokes we make per minute).
In green we see the time that we would need to travel the stipulated distance with the gear ratio and cadence that we have configured.
More information about development for your cycling routes:
At the bottom we see more information about the development combination that we have created. Here we translate it for you:
- Gear Ratio: Transmission ratio
- Gain Ratio: Gain ratio
- Gear Inches: Gear Inches
- Development: Development
- speed: speed
As you can see, it is an app focused on cyclists and people who want to get started in this world. Something complicated for the person who is not used to this type of information but who with a little practice will know how to master it perfectly.
Greetings.
Facebook Comments
Disqus