If you search how to activate DirecTV VenezuelaIn the following article we will explain the necessary steps to achieve it in a short time.
Additionally, you will find the most frequent problems for reactivation along with its solutions, so you can enjoy all the content on the platform.
Steps to follow
Restarting the decoder is the most effective method to reactivate DirecTV Venezuela. You just have to follow these simple steps to achieve it:
- Starts disconnecting the decoder.
- Then plug it in again and turn it on by pressing the “ buttonpower”.
- Finally, you must leave it at rest for the system to reset.
Note: this may take a couple of hours to work.
Problems and solutions
It is possible that some problems may arise when trying to reactivate the DirecTV signal, for this reason, the most frequent failures and their solutions will be detailed below:
- If the error code 721 It means that the antenna and decoder are connected to the satellite, but they have not received the corresponding code to activate the signal. When this happens you must wait, in addition to keeping the decoder active and the system connected to the antenna.
- In case the error 761 or 762 next to the message “Reinsert the card”, it is possible that the fault is in the card or the decoder. Remove the card by opening the compartment located on the receiver panel. Then clean it with a dry cloth, and then reinsert it. Finally, reboot the system.
- When it sends the message “Channel not available” means that said channel is not included in the activation package, so you must request it.
- When the message “No satellite signal” means that there is a communication failure between the antenna and the decoder. This can be due to a poorly installed connection, heavy rain, if the antenna has been moved or if an object is obstructing the signal.
This way you can reactivate the DirecTV Venezuela service, easily and quickly.