Error Message Without Secure Internet in Windows 10. Causes and Solutions

Windows 10 users appreciate and take advantage of its extensive benefits and usability improvements that elevate their digital experience; However, they do not avoid various types of errors or problems that become real annoyances.

Not being able to connect to the Internet is one of these difficulties. If you have received the error message “No secure Internet”, we invite you to read this article to understand its causes and take effective solution actions.

No Secure Internet in Windows 10. What this error means

During work or entertainment sessions with your computer equipment, facing unexpected errors or failures is a disconcerting event for the user.

It is a highly annoying situation, especially if one considers that when using new and more advanced technological tools such as the Windows 10 operating system, it would be logical that these events would decrease.

Daily practice returns them to a reality where they do not avoid problems and complications with their operating system. Errors are many and common and all make your experience difficult.

One of these errors is the one that manifests itself with the message: Without secure Internet, and obviously, Not having access to the Internet causes alarm because it is a vital tool for the development of each digital experience.

Read Also

The sudden error message indicating that you are in a No Secure Internet condition is a problem that, according to user reports, isIt appears after downloads or updates of the operating system.

Occurs with Wi-Fi connections. Even when there is a connection through a wireless network and everything is correctly connected, you are left without being able to access the Internet, you can’t navigate or load any pagesand you go through a situation that has become common in Windows 10.

A yellow triangle on the icon is the attention alert and when you press to check the connection, the error message No secure Internet appears.

The No Secure Internet error also occurs under other names; different types of messages have been reported, all with the common denominator of not allowing access to the web.

Similar problems have been identified such as:

• Without point of Internet, Ethernet unidentified network. Manifested in Windows 8 and 7 versions.
• Wi-Fi without valid configuration.
• Secure with Netgear network adapters and TP link.
• Laptop without secure Internet in Windows 10, affects any brand (ASUS; HP, Dell).
• without secure internet.

Different manifestations of the same problem generated by multiple causes and hardware or software conflicts: outdated drivers, interference from installed applications, Wi-Fi settings.

Read Also

In short, it is of utmost importance to understand what causes the No Secure Internet error in Windows 10 to determine its effective solution. Below we describe the general causes of the error, shared in Microsoft community forums and various specialized publications.

What generates the No Secure Internet error in Windows 10

Like all crashes in Windows 10, no specific cause has been identified for the No Secure Internet error, multiple types of software or hardware conflicts can trigger it.

The Microsoft community forums report that the problem can arise from failures in various aspects and elements such as: DNS cache, obsolescence of device drivers, compatibility conflicts with the operating system or incorrect configuration of the Internet service provider.

Among all the probable causes of the No Secure Internet error presented, the most common is that there has been a change in the configuration of your IP address and its invalidation.

It has been identified that This configuration change in the IP address occurred after updates to programs or applications installed on your computer and specifically after updates to the Windows operating system.

Read Also

You can consult information about the treatment of this error in the .

Likewise, we present the solution methods that in real practice, according to user reports, have proven to be effective to correct the error message: No secure Internet in Windows 10.

Methods to fix the error: No secure Internet in Windows 10

As there are several different methods to fix the No Safe Internet error in Windows 10, it is advisable to check one by one to ensure you identify which one is most effective in the specific case of your computer.

As preliminary actions When implementing any method we suggest:

• Verify that the connection indicator lights are on.
• Check that the cables are plugged in correctly and without breaks or kinks.
• Check that you are the correct distance from the .
• Check that it is not a failure or drop in the service of your Internet operator.
• Check if your wireless network adapter device is working properly by restarting it; You do this by turning off the device and turning it on again after a few seconds.

If when you perform these checks, everything works fine but you still do not have the No Secure Internet error persists, try the methods described below.

Method 1. Check and verify the function of your device drivers

Compatibility issues and conflicts with device drivers cause the No Safe Internet error in Windows 10.

Read Also

You may come across the fact that they are already obsolete or its version is not supportedin that case there are actions in relation to the function of your controllers that will allow you to keep them in an optimal state, such as:

• Update device drivers

In case the drivers are too old and obsolete, you can proceed to update them to the most recent versions available for the model and brand of your wireless network adapter.

Since you do not have Internet access, you must download on another computer and then upload it to yours.

The location of drivers and their subsequent download must be done from the device manufacturer’s website on their support page, in the Driver and Software Download section; and after transferring them to your computer, proceed to install them.

This update can also be done from the Device administrator with the following steps:

1. In Start writes Device administrator.
2. Click on the result.
3. In the list of Drivers click on Network adapters and in the display look for the Wi-Fi driver.
4. Click, with the right mouse button, on the wifi controller and select the option .

If you are not happy with performing a manual driver update, you can opt for the automated tool supportsoftware that with just one click searches for and installs the driver versions appropriate to your computer configuration and needs.

Read Also

We suggest you try the driver updater and tool.

• Roll back to the previous version of the network adapter device driver

If you already have the latest driver and with it running the error: No Secure Internet in Windows 10 appears and persists, another form of driver-related correction is to go back to its previous versionin the following way:

1. In Home write Device administrator. Click on the result.
2. Click on Network adapters and in the display look for the cWi-Fi controller.
3. Click, with the right mouse button, on the wifi controller and select the option Properties.
4. In properties click on Roll back to previous version.

To execute this action you must follow these instructions:

1. In the menu search bar Start add the text: Device administrator and click on the result, you will see the list of Drivers.
2. Click on Network adapters and in the display look for the Wi-Fi driver.
3. Click, with the right mouse button, on the wifi controller and select the option Uninstall.
4. Choose Delete the driver software for this device.
5. Click on Uninstall.
6. Now in the top bar of the Device administrator locate the icon Check for hardware changes This will reinstall the driver.
7. Restart your computer and when you start again Windows will automatically install the required driver.

• Configure network adapter device drivers, defined in your system by default

To comply with this modification related to Wi-Fi device drivers you have to:

To execute this action you must follow these instructions:

1. In Start writes Device administrator.
2. Click on the result.
3. In the window of Administrator you will see the list of Drivers.
4. Click on Network adapters and in the display look for the Wi-Fi driver.
5. Click, with the right mouse button, on the wifi controller and select the option controller.
6. In the next window select Search your computer for driver software.
7. In the next box click on Choose from a list of device drivers on your computer.
8. In the window Update driver software… press to mark the option grid Show supported hardware.
9. Select the options presented as available.
10. Press following and wait for the default adapters configuration process to finish.

Method 2. Run the troubleshooter and network troubleshooter

He problem solver is a built-in feature that resolves common issues and can help you fix the error: No Secure Internet in Windows 10.

Read Also

Start the Solver from problems So:

1. Open the Setting Windows: Press the keys together Windows + I.
2. In the window that opens, click on Settings app.
3. Locate the section Update & Security and press to open.
4. Choose Troubleshoot and then Internet connections (Right panel).
5. Click on Run the troubleshooter. The problem analysis and detection process will begin, wait for it to complete completely.

If the error: No secure Internet in Windows 10 persists, run the Advanced option Network Adapter Troubleshooter.

The diagnosis and necessary repair of the Network Adapter Troubleshooter It is executed as follows:

1. In the menu Start Windows opens Setting.
2. Click on the option Network and Internet.
3. Once there, locate and click on State (to the left of the window).
4. Locate the section Advanced network settings and in it click on Network troubleshooter.
5. The pop-up window informs you about the scanning process. In this section you can select each network adapter that you want to be diagnosed, one by one, or mark the entire available group.
6. Press the button Following and of the assistant Solver.

Method 3. Reset the Internet connection

You can activate this other method to correct the No Secure Internet error in Windows 10 by following these steps:

1. In the system tray click on the identification of the and then click on Forget.
2. Now disconnect the cable ethernet Of the device.
3. After disconnecting…