Hamachi stopped. Fix Problems With This Service In Windows 10

Services compatible with Windows may present problems in their operation, causing error messages to emerge that identify the failure and interfere with the execution of certain software installed on your computer equipment.

User reports warn that these error messages have become common in the popular Hamachi VPN service, which in Windows 10 manifests itself with the code Hamachi stopped.if you are facing this problem, we will explain what causes it and how to solve it.

What causes the Hamachi stopped error alert in Windows 10 and 8

If when trying to start the VPN service on your computer with Windows 10 and 8 operating systems, you face an obstruction of this action identified with the message: Hamachi stopped.you’ll want to know what it’s about.

Of course, the obvious thing is that it is a failure that prevents you from executing the functions of this service, unexpected since it is software designed with high compatibility for this operating system.

I can’t use the Hamachi program, it has become a common report in Windows 10 users, which also occurs in some cases in version 8. This error derives from multiple causes that you must know to address its solution.

Causes of the Hamachi stopped error in Windows 10

TO Below we present the causes identified as generating the Hamachi stopped error message in Windows 10, each cause usually corresponds to a simple solution applied:

Read Also

1. Cause: The Windows Management Instrumentation (WMI) service is configured to remain disabled.

Solution: Activate WMI, since the execution of Hamachi functions depends, to a large extent, on this service.

2. Cause: The Hamachi service does not have Administrator privileges.

Solution: Reconfigure the Hamachi application to run with administrator privileges.

3. Cause: Absence or disablement of the Workstation dependency in Hamachi. (This case has been reported after migrating from a previous version to Windows 10).

Solution: Configure Workstation, adding it as an elevated command, through the Command Prompt.

4. Cause: Errors in the configuration of the LogMeIn Hamachi Tunneling Engine. Service startup is not configured correctly.

Solution: Reset startup to Automatic option.

5. Cause: Conflict with third-party security software installed on the computer. There are security and firewall features that obstruct the functioning of Hamachi.

Solution: Temporarily uninstalling security software or setting exceptions that includes the LogMeIn Hamachi service.

6. Cause: Computer equipment power cycle disconnection configuration. If your computer is configured to disconnect frequently to save power, it is likely to generate the Hamachi stopped error and force you to restart the service.

Solution: Configure a new startup task to prevent Hamachi from stopping with every power disconnection.

Read Also

According to these causes, in addition to the Hamachi stopped error, other similar problems are also generated, all related to configuration errors, such as:

• Hamachi service status stopped Win 10.
• Hamachi tunnel problem.
• Hamachi service stopped cannot start, keeps stopping, cannot be found.

For quick and easy solutions we present below the of each solution method applicable to Hamachi stopped error and crash message on Windows 10 (and 8).

Solution Methods for Hamachi Stopped Error in Windows 10

Once the possible causes of the Hamachi stopped error have been clarified, you can proceed to solve it, for this we provide you with the explanation of 10 methods that adapt to each specific situation.

The recommendation is to apply each method until you find the relevant solution. We start with step by step.

Method 1. Enable the Hamachi service to run with Administrator privileges

This first method will guide you in verifying the configuration of the Hamachi service administrator privileges and in case they are not available, activate them to overcome the Hamachi stopped error.

To activate Administrator privileges you must:

Read Also

1. Right-click on the executable file LogMeIn Hamachi.
2. In the display select the option Execute as an administrator. You must do this action every time you start the program.

You can also configure it to run with administrative privileges automatically:

1. Right-click on the executable file LogMeIn Hamachi.
2. In the display select the option Properties.
3. In the box of Properties select the Compatibility tab and check the box there Run this program as an administrator.
4. Press Apply and Accept to finish the configuration.
5. Check if the Hamachi stopped error is fixed by starting the program again.

Method 2. Activate the Windows Management Instrumentation (WMI) service

In a Windows environment, LogMeIn Hamachi needs to be activated the Windows Management Instrumentation servicewhich due to some failure or omission may appear by default as deactivated.

To check its status and/or enable WMI :

1. Open the box Executionsimultaneously press the keys Windows + R.
2. In the box of Execution add the text: services.mscpress Accept either Enter. (User Account Control can request authorization, in which case click on Yeah).
3. The box will open Servicesthere in the list you will find, in the right panel, the service Windows Management Instrumentation.
4. Double click on WMI and in the display select the option Properties.
5. In Propertiesin the tab General check the configured startup type, if the option appears Manualyou must change it to Automatic.
6. Press Apply and Accept to activate WMI.
7. Start Hamachi again to check if the Hamachi stopped issue is fixed.

Method 3. Change the Hamachi dependencies in the Windows Management Instrumentation service

To solve the Hamachi stopped error, v is required.erify Hamachi dependencies available and add those that are necessary for its correct operation.

It is essential that add the Workstation dependency (Workstation) in the Windows Management Instrumentation (WMI) service. You solve this with an elevated command of the Symbol of the system (Command Prompt).

To do this follow the following step by step:

Read Also

1. Press the keys together Windows + R.
2. In the frame Execute add the text: cmdpress Acceptthis will open the box Symbol of the system. (User Account Control can request authorization, in which case click Yes).
3. In the elevated command line Add the text of the following command: sc config Hamachi2Svc depend= Winmgmt/LanmanWorkstation.
4. Press Enter to configure the necessary dependency.Note: Can and the name of the command or if you prefer to write it, keep in mind that after the symbol= you must leave a space.
5. Restart the computer and check if the Hamachi stopped error is fixed.

Method 4. Correctly configure LogMeIn Hamachi Tunneling Engine and change the start of the service.

You must change the startup mode or type of LogMeIn Hamachi, setting it to the option Automaticthis way you will start each session as a local system account, without affecting your startup or stopping.

LogMeIn Hamachi Tunneling Engine It is configured as follows:

1. Press the keys together Windows + R.
2. In the frame Execute add the text: services.mscpress Accept to go to the box Services.
3. In Services locate in the list LogMeIn Hamachi Tunneling Engine and double click on it.
4. In the frame Properties select the tab General and change the startup type to the option automatic.
5. Next, go to the tab and select the local system accountalso check the box Allow the service to interact with the desktop.
6. Press Apply and Accept to save changes to the configuration.
7. Now, in the Windows File Explorer find the Hamachi installation location. (Default is C:Program Files (x86)LogMeIn Hamachi).
8. Open the folder LogMeIn Hamachiand there click, with the right mouse button, on hamachi-2.exein the display select the option Properties.
9. In the box of Properties select the tab Security.
10. In Group or user names select the option Usersthere verify that permissions are allowed. Reading and Execution.
11. If they are not allowed, change their status by clicking on the button Advanced.
12. Verify that the Hamachi stopped error has disappeared by starting the service again.

Method 5. Temporarily uninstall security software or set scanning exceptions for the Hamachi service

Sometimes security software, antivirus or firewall, They perform overprotective functions and can hinder and block the functions of legitimate programs that they inadequately identify as possible threats.

This can also happen with the Hamachi service, so Temporarily uninstall security software or set scan exceptions It can be useful to maintain its correct functioning.

The steps of uninstalling security software and/or setting scanning exceptions depend on the software you have in use.

When uninstalling or reconfiguring exceptions, restart your computer and check if it is running the Hamachi service, thus solving the Hamachi stopped problem.

Read Also

Method 6. Set a startup task to prevent Hamachi from stopping with every power disconnection

If when using the Hamachi service, your computer suffers a power outage, this will stopcausing interruptions in its operation.

The quickest solution to this is to restart the computer and the service, which can be annoying if it must be done several times during each session. The ideal is to automate the Hamachi reboot process.

This automation of the process can be achieved by creating a new startup task, which by launching a .cmd file, will save you from constantly restarting. To do this, do the following:

1. Press the keys together Windows + Rthe box will open Execute.
2. In Execute add the text: notepad (memo pad) and press Accept.
3. It will open the memo pad with Administrator functions. (User Account Control can request authorization, in which case click on Yeah). Attention: Don’t open the Memo pad as a normal window, since the Administrator function is needed to make the changes.
4. In the window of Notepad with Administrator functions Write the following commands in order:

• net stop Hamachi2Svc
• net home Hamachi2Svc
• starts “X:FilepathLogMeIn HamachiHamachi-2-ui.exe”.
• exit.

The x of this command indicates the letter of the root drive where the file is located, you must replace it with the corresponding one, for example: C:Program Files…