Many users connect to the Internet through wireless adapters and, practically, most laptop users access the Internet on their devices through a wireless adapter, which may have problems and do not know how to solve it.
This is why if you receive an error message while connect with wireless adapterin this article, we will present several solutions to this problem.
Wireless Adapter or Access Point
A wireless adapter It is a device that connect via USB to your computer, whether desktop or laptop, and has the appearance of a pendrive, and allows you to connect to Wi-Fi networks.
Normally you should install the drivers that come with the USB WiFi card itself, although if you use Windows 10it is very likely that it will automatically recognize the wifi adapterand then install the drivers without user intervention.
The wireless adapters will provide you with the possibility of connecting via Wi-Fi to you or Wi-Fi access point, in case your computer did not have a WiFi card previously.
Read Also
In the case of laptops, all of them have a wifi card inside, but the computers low-mid rangethey usually have very weak WiFi cards and will provide us with poor wireless performanceboth in terms of coverage and speed.
You can also read
How to Fix Problems with Your Wireless Adapter or Access Point
In case you have problems installing the wireless adapter or Wi-Fi access point, here are several methods:
First Method
via a wired connection
It is understandable that when connecting the laptop with a wired connection for Internet kills vibration. But if you can’t access the Internet using WiFi, the best alternative is to try to connect to the Internet through a wired connection.
In that case you just have to connect your laptop to the router with the lan cable. This may be able to solve your problem and you will get the connectivity to the Internet again.
Read Also
Second Method
Delete your current Wi-Fi profile
You may not be able to access the Internet due to corrupt wireless profile. If this is the problem, then it may cause the problem with the wireless adapter or access point.
To do this, you have to delete your wireless or WLAN profile current or forget about the current.
Third Method
Make sure you use the correct password
One of the most common problems with the wireless adapter or access point is not enter the correct passwordas you may be accidentally entering the wrong password.
Therefore, it is recommended to check that you are entering the correct password to access WiFi.
For that check the keyboardbecause sometimes certain keys on the keyboard may not be entered, so you will not be able to enter password correct.
So try using the on-screen keyboard to enter the correct password and check if you can connect to the Internet.
Read Also
Fourth Method
Enable the wireless adapter
Sometimes the wireless adapter becomes disabled due to the installation of any third party software in your system.
For this you have to check the settings to make sure it is not disabled by following these steps:
The first thing you have to do is open the Device administratorand then press the key Windows + X and you choose Device administrator.
After that you go to the Device administrator, there it expands the Network Adapters.
After that, double click on your device wireless adapter to open your window Properties.
Read Also
Finally you go to the driver tab and look for the button Activate. If you don’t see the button Activateit means the wireless adapter is already activated.
Fifth Method
Restart the wireless router
In the case that the router is not configured correctly, the error message may appear on the device regarding the wireless adapter.
Before that you just have to press the button Update on your router or you can open the settings of your router and locate the reset option in the settings, to do this :
You have to to turn off your WiFi router or modem, and then unplug the power supply from it.
After that wait a few 10-20 seconds and then reconnect the power cable to the router.
Finally turn on the router and try again to connect your device and you will see if this fixing problem with the wireless adapter or the access point.
Read Also
Sixth Method
Activate the WMM option for your router
This is another solution to fix the problem with the wireless adapter or access pointto do this you have to carry out this procedure:
You have to press the key Windows + Rthen write devmgmt.msc and press on Enter to open the Device administrator.
After this expand the section network adapter, and there it will open a list of all the network adapters installed on your system. Then you have to click with the right mouse button on your wireless network adapter and select the option Properties.
After this you have to navigate to the tab Advanced and locate the option WMM.
Finally you have to select the option WMM and then in the dropdown Worth select in Activated.
Read Also
Seventh Method
Update network drivers
In this case you have to follow these steps:
You have to press the key Windows + R and write “devmgmt.msc” in the dialog Execute to open the device administrator.
Then expand the network adaptersand you click with the right mouse button on your Wi-Fi driver (for example, Broadcom or Intel) and select Update drivers.
In updating the software windows driversselect the option “Search my computer for driver software.”
After that, select the option “Let me choose from a list of device drivers on my computer.”
Then try update drivers of the versions listed.
If the above didn’t work for you, then go to manufacturer website to update the drivers in the following
Lastly you have to restart to apply the changes.
Eighth Method
Clear DNS and restart TCP/IP
With this method follow these steps:
You have to click with the right mouse button on the button Windows and select the option “Command Prompt(Admin)”.
Now type the following command: ipconfig /releaseipconfig /flushdns ipconfig /renew press Enter after each one.
Then open the Admin Command Prompt and write the following ipconfig /flushdnsnbtstat -rnetsh int ip resetnetsh winsock reset and press intro after each one.
Lastly you have to restart to apply the changes, since clear DNS seems with the wireless adapter or access point.
Ninth Method
Temporarily disable antivirus software
Sometimes he antivirus program can cause the problem of network adapter driver and, to verify that this is not the case, it is necessary to disable the antivirus for a limited time to be able to check if the error still appears when the antivirus is disabled.
To do this, follow these steps:
You have to click with the right mouse button on the icon of the Antivirus Program from the system tray and select Deactivate.
After that, select the time during which the Antivirus will remain disabled.
Important note: Choose the shortest amount of time possible, for example 15 or 30 minutes.
Once this is done, try again. connect to the and check if the error is resolved or not.
Tenth Method
Enable wireless network related services
In this case, follow this procedure:
You have to press the key Windows + Rthen write services.msc and press Enter.
After this make sure that the following services are started and that their startup type is set to automatic:
Customer DHCPDevices connected to the network Auto-SetupCorridor of network connectionsNetwork connectivity assistant List of services Knowledge Network Location Network Configuration Service Store Interface networkWLAN AutoConfig
Then you right-click on each of them and select Properties.
After this you must make sure that the type of start is set to Automatic and click Start if the service is not running.
Then you click on Apply and then in Accept.
Lastly you have to restart your PC to save the changes.
You can also read
As you could see the different methods presented, we hope that you have been able to fix the problem with the wireless adapter or access pointand have your device working correctly.
If you want to know other articles similar to How to Fix Problems with Your Wireless Adapter or Access Point you can visit the category.
Facebook Comments
Disqus