If you just bought a Sonos Play 1 or are having trouble restarting it, don’t worry. I am here to help you with a solution quick and easy. It can be frustrating sometimes when it comes to technological devices… but I have good news for you! The reset process is actually very simple, and only takes a few minutes. So, let’s get started!
here are some To reset your Sonos Play 1:
- Unplug the Soundbar from the power.
- Wait for 10 seconds.
- Plug the Soundbar back into the outlet.
- Wait for 10 seconds until the indicator light flashes.
- Press the in the same time.
And ready! If all the steps were done correctly then the Sonos Play 1 will have a successful reset.
Also, remember that the Sonos Play 1 always connects automatically when it is first turned on, so it is important that you have all the cables connected correctly before starting the reset process.
If you still need more help with resetting your Sonos Play 1, you can contact the customer service available to answer any questions you may have.
Now you know how to reset Sonos Play 1 with a and easy. It’s that simple! Ready to reboot? It’s a good idea to disconnect and reconnect from time to time!
Read Also
RECOMMENDED
- First you must lower the Sonos on your iOS device or following the steps established for this and opening the app.
- Once this is done, look for the Restart button within the Sonos app and press it.
- Now, choose the Sonos Play 1 device you want to reset by choosing the corresponding icon.
- A confirmation message will appear at the bottom of the screen, you choose Resume to continue.
- Now, the next steps screen to follow:
- When you’ve completed the steps above, you’ll see another confirmation message where you choose I’m ready.
- Once you have completed all these steps, the app will return to the main menu and the Sonos Play 1 you have selected will have restarted.
What steps need to be taken to reset Sonos Play 1?
Assuming you already have the Sonos Play 1 device, the steps to reset it are as follows:
- 1. Plug in the Play 1 into the power outlet if it is not already connected.
- 2. Seeks the reset button on the back of the device.
- 3. Turn on Play 1 by pressing and holding the button for about ten seconds.
- 4. The orange LED light will flash continuously indicating that the device has booted successfully.
- 5. The Sonos Play 1 is will turn off automatically, to turn it on again you must press the same button and keep it pressed for at least two or three seconds.
- 6. The device will start a new search to connect to the .
- 7. After this, opens the Sonos app to set up your new device.
- 8. And that’s it! You can now enjoy your Sonos Play 1.
Are there any other methods that make it easier to reset Sonos Play 1?
There are several ways to restart the Sonos Play 1 device. You can do it from its own mobile application, for this you need to open the app, Select the device you want to resetpress the setup button and then go to the device settings section.
Once there, look for the restart option and that they appear to you. Another way to reboot is through a plug, which means you will have to unplug the unit for 10 seconds and then plug it back in. This will make the device start a hard reset.
There is also the possibility of do it from the Sonos website: log in with your user account, go to the devices section and select the one you want to reboot.
Finally, if the device does not respond to the above methods, then you will have to perform an advanced reset. For it, uses a sharp object (for example, a paper clip) and keep it inside small speaker slot for 10 secondsthat way you will do a factory reset.
Do I need to do a recent install to reset Sonos Play 1?
Noyou do not need to perform a fresh installation to restart Sonos Play 1. If you want to restart your device, there are several steps you can follow:
Read Also
1. Quick reboot
To perform a quick reset, until the LED starts flashing. That will reset all components of your Sonos system, including the Play 1.
2. Disconnect power
This option simply requires you to disconnect your device from the power source. This can also be done by pressing the and then unplugging the plug. Be sure to wait at least a minute before plugging it back in.
3. Factory reset
If this option is available, it is in the Sonos mobile app. Therefore, all your settings will be erased when you reset it to factory settings. Once done, you just need to add it back to the Sonos system.
As you can see, There is no need to perform a fresh installation to restart the Sonos Play 1. previous for quickly and easily.
How can I be sure that my Sonos Play 1 has been reset correctly?
To make sure your Sonos Play 1 has been reset correctly, :
- 1. Turn on your device Sonos or from the power supply.
- 2. make sure after having carried out the EXPENDABLE RESTART process of the connected speakers and the .
- 3. Check if all speakers are linked to the same network.
- 4. Check that the connection between the speakers is active.
- 5. Manage the configuration of your WiFi network: rename your Wi-Fi network, username or password (if necessary) and verify that there are no conflicts on your network.
- 6. Update Sonos app to get the latest firmware on your speaker system.
- 7. Proof your Sonos Play 1; make a playback to make sure the audio sounds good.
- 8. Check out the group of connected speakers and configure their preferences according to your needs.
By following these steps you can be sure that your Sonos Play 1 has restarted correctly. If you have questions, you can contact Sonos Technical Support for help and resolve your issue.
Read Also
Conclusion
Now you know how to restart your Sonos Play 1 in a burst of speed. This process is simple, you will have no problems enjoying music again as before.
Don’t waste time trying to find the solution to restart it, with this method you can do it in a matter of minutes. So, get ready to enjoy your tunes!
If you want to know other articles similar to How to Reset Sonos Play 1: Quick and Easy Solution you can visit the category.
Facebook Comments
Disqus