How to Use the DIRECTV Remote Control: Step-by-Step Guide

Don’t know how to use the DIRECTV remote control? Don’t worry. Here above we show you a to use it! The DIRECTV remote control is one of the most versatile devices you can find on the market. You can connect it to your TV, set it to respond to your voice commands, and of course, use it to control your DIRECTV devices.

If you want to learn how to use the DIRECTV remote control, here is a guide to do it correctly:

: Program the DIRECTV remote control

• Point the remote control directly at your television.
• Turn on the TV.
• Press the “TV” button on the remote control.
• Press and hold the “Select” button until the LED light turns on and flashes twice. This indicates that the remote control is programmed to operate your television.

Step 2: voice

The voice function will allow you to control your television with voice commands. To activate this functionality, follow the following steps:

• Press and hold the “Voice” button until the LED light turns on.
• When the LED light starts flashing, speak the command “Activate voice function”.
• Release it when the setup is complete.

Step 3: Use the DIRECTV Remote Control

Read Also

Once you have programmed the remote control for your television and activated the voice function, you can start using it. For example, to increase the volume, simply press the “Vol+” button. If you want to use the voice function, simply press the “Voice” button, saying the corresponding command and release it once the device has recognized the command. That easy.

RECOMMENDED

1. Locate the DIRECTV remote control. It’s a small, rectangular device, with a silver cable coming out of the back to connect to DIRECTV.
2. Connect it to the TV. If your TV does not have an HDMI port, you will need to the remote control with the RCA port of your television.
3. Make sure the remote control battery is charged. If necessary, replace the remote control batteries.
4. Turn on the tv– Press the “Power” button on the remote control to turn on the TV. If your TV does not turn on, then the remote control is not connected correctly.
5. Use the buttons to navigate the content. The “Home” button takes you to the DIRECTV main menu. Use the directional buttons to move through the menus; the blue button to return to the previous menu and the red button to see additional options.
6. Access your favorite programs: Use the arrow buttons to select the DVR option. You will be able to see all the programs that you have recorded on the DVR.
7. Set up recording: Select the program you want to record. Press the green button to confirm recording, the yellow button to set loop recording, or the red button to cancel the operation.
8. Play programs: Make sure you have the DIRECTV programming guide open. Select the program you want to watch and press the “Play” button.
9. Use the playback buttons: Stop, Pause, Rewind and Fast Forward buttons allow you to control program playback as you wish.
10. Finally, remember to press the “Power” button to turn off your TV when you are no longer using it.

How to connect the DIRECTV remote control to the TV?

Connect the DIRECTV remote control to the TV too easy. The first thing to do is check that the television is in the correct position to receive the remote control. Usually, it is indicated in the information column of your television. Once the TV is turned on, follow these simple steps:

1. Point the front of the remote directly at the TV and press the “Power” button.

2. A message will appear on the TV screen requesting the authentication code for the DIRECTV remote control.

3. authentication, which varies depending on the model of your television. If you don’t know your code, you can look it up in the DIRECTV online help. If you don’t have the code yet, try the different general universal remote control codes.

4. Once the code has been entered, a confirmation message will be displayed on your TV screen. If the confirmation message does not appear and the DIRECTV remote does not respond, unplug the TV and try again.

Read Also

5. With the remote control working, you can use the “Input” key to switch between the external antenna, the DVD player, among other devices connected to your television.

And that’s how you can connect the DIRECTV remote control to the TV. The key is to point the remote in the right direction and get the proper authentication code. We hope this information is useful to you!

How to configure the DIRECTV remote control to change channels?

Setting up the Directv remote to change channels is an easy and relatively quick procedure; firstbatteries, generally 2 AAA, must be inserted into the back rear of the remote control. After, it is necessary to pair the remote control with the decoder or second screen to which it is connected; this carry out by placing on the button start of the remote control. It must be held down for approximately 5 seconds for the remote control to start to send a radio signal to the decoder.

Subsequently, you must configure the remote control for the type of decoder you will be working with. This is carry by pressing the TVAV/DVD button, located next to the home button, until the corresponding LED lights up, in this case it would be the Directv key light (green). Yeah An error code is displayed on the decoder screen, then you must press the STB/DVR key, if the screen goes blank, then press OK /Select.

Finallystart changing channels, you just have to press the DirecTV key and press the number keys to enter the channel number you want to watch or use the CH+, CH- key to change channels semi-automatically. If no actions are taken for more than one minute, the remote control automatically turns off.

How to search with the DIRECTV remote control?

Searching with the DIRECTV remote control is very easy; However, for those who are still unsure of We are going to explain in detail the necessary steps:

Read Also

• Activate the remote control: If your remote requires activation, press the “Power” button until you see a small light at the top of your TV screen.
• Turn on the screen: To turn on the screen, hold the “Sat” button and the “Power” button simultaneously. Once the screen has turned on, go directly to the main menu to perform the search.
• Write the search: In the central bar of the screen you will find the search section. Use the number buttons to enter your search word. For example, if you want to search for a movie, enter its name.
• Select search: Once the search has been entered, select it using the “OK” button and the system will show all the options that match the term. Choose the desired option and enjoy your programming.

Additionally, remember that you can also access the help section to clarify any type of uncertainty. This is a very useful tool that will allow you to answer all your questions about the remote control of your DIRECTV system.

How to program the DIRECTV remote control for an additional device?

Programming the DIRECTV remote control for an additional device is very simple. First, look on the back of the device and you will find the brand and model codes. This helps identify the device so the remote control can control it. Next, :

Step 1:

• • Press the ‘Menu’ button on the remote control
  • Use the controller to choose the ‘Settings’ option
  • Select the type of device you want to configure

Step 2:

• • Click on the ‘Add Device’ option
  • Choose the type of device that will connect to DIRECTV
  • Manually enter the brand or model code

Step 3:

• • Wait for the confirmation message to indicate that the remote control has been successfully programmed
  • Use the button ‘Test’ to check if the programming has been carried out correctly

Step 4:

Read Also

• Once the check is done, press the ‘Back’ button to save the changes.

By following these steps, you can program your DIRECTV remote control for an additional device. If you have any problem, contact DIRECTV customer service and they will guide you to solve it.

Conclusion

Now controlling your Directv couldn’t be easier! The best way to enjoy your favorite shows and content is with the Directv remote control. We have helped you from start to finish with this guide to use your remote control.

Now, it’s time for you to relax, turn off the TV and enjoy everything that Directv has to offer. We hope you enjoyed this article on how to use the Directv remote control, Step.

If you want to know other articles similar to How to Use the DIRECTV Remote Control: Step-by-Step Guide you can visit the category.