Windows and NVIDIA graphics cards have always had problems, and that arises from the installation of the graphics card in which you may receive the error: NVIDIA installer cannot continue on Windows 10, don’t be surprised.
This error is something that comes when installing different models of NVIDIA graphics card. Therefore, below we will give you several solutions available for this problem, so you can rest assured that your computer will continue to function.
NVIDIA Installer Cannot Continue on Windows 10
He NVIDIA Installer cannot continue, or NVIDIA Installer failed are error messages that will prevent you from installing the drivers for the NVIDIA graphics card; No matter how many times you try to install them, you will most likely keep getting the same message over and over again.
In this sense, there are a large number of possible causes for this error, and it occurs with a great variety of versionsboth with the driver versions and with the versions of Windows.
Given this, although the number of causes is not small, there is a large number of solutionsand once you have downloaded the drivers, even if the installation failed, there will be a folder NVIDIA in the partition where your operating system is installed.
Read Also
This situation is due to the fact that NVIDIA extracts the setting before starting the installation itself, and in the event that you have removed this file after the installation has failed, it will start the installation once again so that it is created even if the installation fails.
In this way, the address of the controller will be C:NNVIDIADisplayDriverXXX.XXNWinXNInternationalNDisplay.Driverwhere C:N is the drive letter of your OS partition, XXX. XX is the version number of the drivers you are installing, and WinX is the version of the Windows operating system, as is 32 bit or 64 bit.
You can also read
Methods to fix the error: NVIDIA Installer cannot continue on Windows 10
In order to solve this problem that occurs in your operating system, we invite you to try any of these methods:
First Method
Enable the graphics card and try to manually update the drivers
In this case you have to follow these simple steps:
Read Also
You have to press the key Windows + R and scribe “devmgmt.msc” (without quotes) and you hit enter to open the Administrator of devices.
Then expand the Adapters screen and you click with the right mouse button on its NVIDIA graphics card and select Activate.
After you have done this again, you right click on your graphics card and select “Update driver software”.
After that select “Automatically search for updated driver software” and let the process finish.
If the previous step fixed the problem, then great, if not, then continue.
After that, select again “Update driver software”but this time on the next screen you select “Browse my computer for driver software.”
Read Also
Then you have to select “Let me choose from a list of device drivers on my computer.”
you select the compatible controller from the list for your NVIDIA graphics card and you click on Next.
Finally, you let the previous process finish and restart your computer to save the changes, and thus correct the error. “The NVIDIA installer cannot continue.”
Second Method
Manually add the device ID of your graphics card to the INF configuration file
In this case you have to follow these steps:
Read Also
You have to press the key Windows + R, then write devmgmt.msc and you hit enter to open the Device administrator.
After that you must expand adapter screen and right-click on your graphics card device NVIDIA and select the option Properties.
After this, you change to the Details tab and in the Property drop-down menu you select “Device instance path”.
After this enter the following command: PCIVEN_10DE&DEV_0FD1&SUBSYS_05781028&REV_A14&274689E5&0&0008
The above has all the details about your Graphic cardfor example, manufacturer data, chipset and model, etc.
Read Also
After that you go to the VEN_10DE where it says that Sell Id is 10DE What is the seller ID of NVIDIA, DEV_0FD1 and it says that the Device Id is 0FD1 which is the graphics card NVIDIA GT 650M.
After that, when manually installing the driver, the error could occur “This graphics driver could not find compatible graphics hardware.”
After that you go to the NVIDIA installation directory: C:|NVIDIAN-DisplayDriverN-355.82NWin10_64N-International.Driver
Being in the previous folder you will find many INF files, including these: nvaa.inf nvaci.inf nvami.inf nvaoi.inf nvbli.inf nvdmi.inf With that, it creates a backup copy of the entire information file.
After that, choose any of the above and you will open in the text editor.
Then you have to scroll down until you see something like the following:
NVIDIA_DEV.06CA.048F.1028% = Section001, PCIVEN_10DE&DEV_06CA&SUBSYS_048F1028 1A.1028% = Section003, PCIVEN_10DE&DEV_06DA&SUBSYS_081A1028 NVIDIA_DEV.0DCD.0491.1028% = Section004, PCIVEN_10DE&DEV_0DCD&SUBSYS_04911028 NVIDIA_DEV.0DCD.04B7. 1028% = Section005, PCIVEN_10DE&DEV_0DCD&SUBSYS_04B71028
Read Also
Then you carefully move down to the section which is similar to (or the same as) your Seller ID and Device ID.
NVIDIA_DEV.0FD1.0566.1028% = Section029, PCIVEN_10DE&DEV_0FD1&SUBSYS_05661028
Immediately, you have to repeat the previous process until you do not find a coincidence similar in all previous files.
Once you have found the similar section, try to create a key that matches the instance path of your device.
Then insert it into the section and you will see the following: NVIDIA_DEV.0FD1.0566.1028% = Section029, PCIVEN_10DE&DEV_0FD1&SUBSYS_05781028
After that you can scroll down to the section you will see the following:
Read Also
DiskID1 = “NVIDIA Driver Library Installation Disk for Windows 10 (64-bit)” NVIDIA = “NVIDIA” NVIDIA_A = “NVIDIA” NVIDIA_DEV.06CA.048F.1028 = “NVIDIA GeForce GTX 480M” NVIDIA_DEV.06CA.0490.1028 = “NVIDIA GeForce GTX 480M” NVIDIA_DEV.06DA.081A.1028 = “NVIDIA Quadro 5000M” NVIDIA_DEV.0DCD.0491.1028 = “NVIDIA GeForce GT 555M” NVIDIA_DEV.0DCD.04B7.1028 = “NVIDIA GeForce GT 555M” NVIDIA_DEV.0DCD. 04B8.1028 = “NVIDIA GeForce GT 555M” NVIDIA_DEV.0DD1.02A2.1028 = “NVIDIA GeForce GTX 460M” NVIDIA_DEV.0DD1.048F.1028 = “NVIDIA GeForce GTX 460M” NVIDIA_DEV.0DD1.0490.102 8 = “NVIDIA GeForce GTX 460M” NVIDIA_DEV.0DD1.0491.1028 = “NVIDIA GeForce GTX 460M” NVIDIA_DEV.0DD1.04B9.1028 = “NVIDIA GeForce GTX 460M” NVIDIA_DEV.0DD1.04BA.1028 = “NVIDIA GeForce GTX 460M”
Then you can add a line for your video card:
NVIDIA_DEV.0FC6.068B.1028 = “NVIDIA GeForce GTX 650” NVIDIA_DEV.0FD1.0578.1028 = “NVIDIA GeForce GT 650M” NVIDIA_DEV.0FD2.054F.1028 = “NVIDIA GeForce GT 640M” NVIDIA_DEV.0FD2 .055F.1028 = “NVIDIA “GeForce GT 640M”
Before that you have to save the file and then run Setup.exe again from the following command: C:NNNVIDIAN-DisplayDriverN-355.82NWin10_64N-International
Third Method
Uninstall NVIDIA completely from your system
In this case you must complete each of these steps:
Read Also
You have to press the key Windows + X and select Control Panel.
From the Control Panel you have to click on Uninstall A program.
After that, uninstall everything related with NVIDIA.
Lastly you have to restart the system to save the changes and download the configuration again.
Once you are sure you have removed everything, try installing the drivers again. The installation should work without any problems.
With that you have successfully fixed the error “The NVIDIA installer cannot continue.”
Read Also
Fourth Method
Installing the drivers
In this case you have to follow this procedure:
You have to open the Administrator of devices by pressing the key Windows on your keyboard, and you type Device Manager and open the result.
After that uninstall the NVIDIA graphics driver. Expand Adapters screen, and select the NVIDIA graphics driver.
After that, in the toolbar at the top, you have to open the menu Action and select in Uninstalland then wait until the wizard has finished and restart your computer.
After this the Administrator of devices again, you have to click with the right mouse button on the NVIDIA driver and select Update driver software.
Read Also
Then select Look for on your computer the driver software, and from the next screen you go to the folder NVIDIA where the installation extracted the files.
You need to make sure you include the marked subfolders. Then you click on it, and wait for it to finish.
To finish, you can restart your device again when this is finished.
After that step you will only have installed the display driverthen you go to the folder where the installation files are extracted and run the .exe fileand by accepting the terms of the installation you choose Custom install, and you check Perform a clean install, this will install everything that was not installed with the manual installation.
Fifth Method
Renaming the NVIDIA folder in Program Files
In this procedure you must comply with the following:
You have to open the partition where your operating system is installed, and you go to the folder Program files.
Read Also
After that you will find a folder called NVIDIA Corporationthen you right-click on select Renameor alternatively, click on it and press F2 on your keyboard, then Rename to something else, and click on Enter on your keyboard to save it.
After that you have to run the configuration again, and it should work without errors.
Sixth Method
Disabling antivirus
In this case you have to follow these steps:
You have to go to the system tray of your computer, in it you will find the antivirus or malware that runs on your PC, so you can disable the running antivirus from there.
You can also open the menu Start and writes Taskmgrfrom the search result, click on the option Task Manager.
Read Also
Then you head to…
Facebook Comments
Disqus