Official Philips Universal Remote Code List

The programming of remote control is what you can do after buying a new television or remote control Philips. Each remote control is equipped with a code that can be used to program the remote control, which may result in loss of the code. Official Philips Universal Remote Code List.

Even if you set a wrong code, you can program the Philips remote control using the list of remote control codes Philips universals. Philips offers dozens of universal remote controls: from the standard long black type to the high-performance programmable touch screen ones.

Fortunately, models that require programming are easy to use and perform the same basic steps. Before programming your Philips universal remote, consider how many devices your remote can control.

Next, think about what you want to program, whether it’s a TV, DVD, DVR, stereo or other electronic devices, as well as a home theater device.

Read:

Programming the Philips universal remote using code search

The Philips universal remote has a built-in code search function to help you find the correct code for your device. This process may take longer than using native code. However, this helps if you don’t have the list of Philips remote control codes or your device brand is not listed.

The universal command Philips has a list of codes for the brand’s devices. Find the first code for the brand and type of device you are programming.

Turn off all devices, and then turn on the device you want to program manually.
Press the button “Settings” of the universal remote control and leave it until the indicator stops flashing and turns on steadily.

Release the “Settings” button.

On the Philips universal remote control, press the mode button of the device you want to program (for example, the TV or DVD button. Remove it immediately and make sure the indicator is on.
Enter the first possible 4-digit code of the Philips universal remote control.
Then press the other buttons on the remote control. Press to see if the device is currently programmed (for example, B. Volume control or power switch).

If the device responds, you have successfully programmed the universal remote control.

If you don’t, please turn the device off and on again and enter the next code in the list, follow the steps again, repeat until the device responds successfully.

Program the first device by entering direct codes

: Turn on the TV (or other device). You must do this manually until you have programmed your Philips remote control.
Step 2: Locate the setup or code search button on your Philips remote control. The buttons on the remote control depend on the Philips remote control you are using. This button can be colored or marked in different ways.
Step 3: “Settings” either “Code Search” for about 10 seconds. When the indicator on the remote control is on, the lamp flashes. If the indicator is off, you can count to 10 and release the button.
Step 4: Press the TV button on the remote control to program the Philips remote control to the TV. Locate and press the up or down button on the remote control. Press and hold one of the two buttons until the TV channel changes.

This may take several minutes. After changing the channel, turn off the TV by pressing the power button. on off of the remote control. The Philips remote control is now programmed to the TV.

Note: You can find the Philips remote control user manual by clicking the link in the Resources section. The user manual contains the programming code for a specific remote control.

Philips Universal Remote Code List

If you want to know other articles similar to Official Philips Universal Remote Code List you can visit the category.