It is known that the operating system Windows 7 It is not free of errors, and sometimes it keeps starting, stopping work on the computer and creating problems in the execution times in the system.
That is why in this article we will explain how to locate the cause of the problem, which may be consequence of a software error or because a hardware component has broken, and most importantly what to do to narrow down the problem and solve it.
Windows 7 Keeps Starting
One of the problems that can cause frustration is that your computer does not start properly, since when it encounters a problem during the startup process Windows is paralyzed and does not move forward, showing a blue screen or error message.
It may be that your Windows 7 hangs during startup, forcing you to look «Start Windows» for an hour, and you have to reboot manually, so it freezes in the same place again. Even if your team has Windows 10 It will restart automatically, and at some point after it starts charging it will produce a “reboot loop”.
This is because the computer may even stop at a point where moving the mouse does nothing. So Windows may appear to still be trying to start, but in reality Eventually, you have to manually restart your computerand you will continue to see the same behavior again.
Read Also
Likewise, it may happen that you see a blue screen full of information, or flashes on the screen before your computer restarts, and that is a Blue Screen so your computer is configured to restart after once.
If your PC is booting to the boot screen Windowsyou may see any type of error message, or if you are not even passing the POSTyou should see how to fix the computer that does not turn on in order to get the best troubleshooting guide for your specific problem.
What to do if Windows 7 keeps starting
In the event that you have the boot problem in Windows 7, this will be due to the software, for this there is a list of possible solutions that allow you your computer, and fix the error:
First Method
Starting Windows in safe mode
Read Also
When Windows 7 does not start, you have to resort to calling safe mode as the first option, so this is a configuration in which the OS It’s still up and running, without any software autoboot and only the absolutely necessary standard drivers.
This is why, externally, safe mode is immediately recognized by its unusual screen resolution, to do this you must follow these steps:
The first thing you should do is access the driver in all versions of Windows through the menu Basic Input/Output System BIOS or on newer computers through the menu Unified Extensible Firmware Interface UEFI.
It then opens if you press the certain key or key combination when starting the computer before the logo appears. Windowsand that will depend on the version of BIOS or UEFI that is offered by the hardware manufacturer.
When in the menu BIOS or UEFI you can choose between the following three options:
- Safe Modewhich starts Windows in the usual desktop environment (Explorer), but with limited features and reduced display.
- Safe mode with networkingwhich also starts those services that allow Internet access to, for example, download new drivers or external repair tools.
- Secure mode with system symbol, which is instead of Windows Explorer, starts the command line cmd.exewhere advanced users can enter text commands to secure personal data or run an antivirus program.
- FOURTH STEP
If your computer starts in safe mode, there is no problem with your system settings or default drivers.
Read Also
In the secure desktop environment you can run a virus scan or uninstall software, in the “Control Panel” low “Programs and functions” or the drivers in the “Device administrator” recently installed.
Finally you have to restart your computer to check if the problem has been solved.
You can also read
Second Method
Testing Windows Automatic Repair
In order to repair the system automatically you must have the installation disk of your windows versionsince it contains a folder with the environment windows recovery either Windows RE which allows errors to be automatically detected and corrected.
Read Also
Windows RE is currently located in a separate system partition that is activated with the push of a button, and this can happen when using it for the first time, when Windows asks you to create bootable media like a US memoryB through a digital license.
Given that, in order to use the selected installation disk and repair Windows, you have to make sure that the computer starts from it, following these steps:
The first thing you should do is look at the menu BIOS or UEFI and use the arrow keys on your keyboard to navigate to the tab “Boot”
Then you have to select the installation disk and press “Enter.”
Then the boot menu that will open, you have to click on “Solve problems” In the bottom left.
All this will depend on the version of Windows that you use, and thus be able to access automatic system repair in the following ways:
Read Also
- In Windows 7: Go to Advanced Options and then System Restore.
- On Windows 10 and 8: You go to Troubleshooting, then Advanced Options, and finally Startup Repair.
Third Method
Restoring to the previous version of Windows
In the event that the current version of Windows cannot be repaired manually or automatically, the most effective option is restore the operating system to the version in which everything worked correctly, since the restoration will leave your personal files intact, unlike reinstalling the system.
Given this, the prerequisite is that you have the system image (Image) corresponding, and that you have disabled this feature yourself, since Windows It creates these images automatically at regular intervals or whenever you change something fundamental in the system, such as installing drivers, replacing a hardware component, or performing an update.
In the case of Windows 7 It is possible to create system images using standard tools, and they can be found under the following paths:
- In Windows 7: You get to Control Panel then System and Security, then Backup and Restore, you continue with Create a system image and finally to Backup Settings.
- In Windows 8: You enter the Control Panel, go to System and Security, then to the File Version History and end with the System Image Backup.
- In Windows 10: You enter the Control Panel, then you go to System and Security, then the Backup and Restore Center and finally Create a system image
After that you have to select the desired partitions and the recovery disk as a external hard driveand manage to save the system image, which may take a few minutes or hours, depending on the amount of data and the performance of the computer.
Read Also
After all this, you can restore it to a previous version of the operating system by following these steps:
You have to boot from the recovery disk
After that you go to the following start menu item:
- Windows 7: Go to Advanced Boot Repair Options, then Repair Your Computer, and finally click System Restore.
- Windows 10 and 8: You go to the Advanced Options and then you go to System Recovery.
Fourth Method
Repair bootloader
Sometimes Windows may send an error message indicating the underlying problem: “BOOTMGR missing” or “bootloader is missing”meaning that the program that controls the Windows startup process was deleted or damaged, which could have occurred due to a computer virus.
Read Also
In order to solve it, you have to reinstall or repair bootloaderwhich is a task that is assumed in the automatic repair system, if contrary to this the use of your installation data carrier does not lead to success, you can also do it manually.
To do this, you can open the tab “Secure mode with system symbol” and then enter the following commands cmd one after another on the command line and then confirm each one with the key Enter:
bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd
After entering the commands, you have to leave the space between the two terms. If this process is complex, you can also use the option “System Restore” in order to restore Windows to a state where the boot loader was still working correctly.
Fifth Method
Reinstalling the Windows operating system
Read Also
In order to reinstall the operating system you need the installation disk. However, before doing this, you have to have your personal data backed up, and that is done at regular intervals, just like the system image is done, so you should always be prepared for a possible problem. .
By having that you have the option of “Deactivate programming” which is found in the standard Windows resources which are as follows:
- Windows 7: You go to the Control Panel then to System and Security, then to Backup and Restore and finally to Settings for a backup.
- Windows 8: First you go to Control Panel, then System and Security, and then File Backup with the file version history.
- Windows 10: First you go to Control Panel, then System and Security, then Security and Maintenance, then Recovery, then Set up system restore, and finally Create.
If you start the computer, the error message will appear “Operating system not found”, so it is recommended to reinstall Windows. This occurs when you have installed a new hard drive in your computer that does not yet have an operating system. But you should check if you have changed the boot order, as that may be the reason why the hard drive is not recognized.
What to do if the computer does not start
In the event that Windows does not start, nor the menus BIOS or UEFI functions it is possible that there is not a software error, but rather a hardware defect, so that is related to the Graphic card that is not connected correctly, because there is dust on the contact points of the main memory or the newly installed processor is not compatible with the old motherboard.
jQuery(document).ready(function($) { $.post('https://wingdingstranslator.com/wp-admin/admin-ajax.php', {action: 'mts_view_count', id: '49581'}); });
Facebook Comments
Disqus