If you cannot connect to the Internet due to the error “It can’t be done to this network” in Windows 10, below you will find the steps to solve this problem on your computer.
Windows 10 Can’t Connect to This Network / SOLUTION
The error Windows “I can’t connect to this network” It is mainly because your computer’s network adapter drivers have become outdated or corrupted.
Read:
This error usually appears after of the WiFi, when trying to connect to the after you disconnect and can also occur at other times.
If updating the network drivers does not fix the problem, you should be able to fix it by running the network troubleshooting commands and other methods listed below.
1. Forget the network and join again
The easiest way to fix this problem is to forget the network and rejoin the network Wifi or Ethernet by entering the password.
Read Also
- 1. Go to Settings > Network and Internet > click Wifi in the left panel. In the right panel, click the option Manage networks known.
- 2. On the next screen, click on your WiFi network and press the button Forget.
- 3. Now, click on the network icon in the toolbar tasks > select your network and click Connect.
- 4. Next, enter the password for your WiFi network and click the button Following.
Note: On some routers, you can also connect by pressing the connect button.
2. Update network adapter drivers
If you cannot connect to the network using the first method, the problem may be due to outdated network adapter drivers.
Read Also
- 1. Right-click on the button Start and click Device administrator.
- 2. On the screen of Device administratorexpand the entry Network Adapters > right click on the WiFi Adapter and click on the option controller.
Advice: If you see multiple entries, look for something that has Network, 802.11b or WiFi.
- 3. On the next screen, select the option Search automatically updated driver software and follow the on-screen prompts to install the updated driver software (if available).
3. Run the network troubleshooter
Windows 10 comes with its own Network Troubleshooter, which can be relied on to fix many network connectivity issues.
- 1. Go to Settings > Network and Internet > click State in the left panel. In the right panel, scroll down and click on the option Problem solver network.
- 2. Wait for Windows to diagnose and fix connectivity problems on your computer.
4. Run Network Troubleshooting Commands
The next step is to run the network troubleshooting commands to reset the TCP/IP stack, free the IP address, refresh the IP address, and flush and reset the DNS client cache.
- 1. Right-click the button Start and click Command Prompt (Admin).
- 2. In the Command Prompt window, type netsh winsock reset and Intro.
Read Also
Similarly, run the commands netsh int ip reset > ipconfig /release > ipconfig /renew and ipconfig /flushdns.
- 3. Close the command prompt window and restart your computer.
Now, see if you can connect to the Internet, without encountering any error messages.
5. Disable IPv6
On some computers, it is known that disable IPv6 Helps fix network connectivity issues.
- 1. Go to Settings > Network and Internet > Scroll down the right panel and click Center network and sharing.
- 2. In the Network and Sharing Center, click your Current network
- 3. On the next screen, click the button Properties.
Read Also
- 4. On the network properties screen, uncheck the option Internet Protocol version 6 (TCP/IPv6) and click Accept to save the settings.
After disabling IPv6, restart your computer to apply the change. The error “Windows 10 cannot connect to this network” It may also appear due to your network settings.
If you want to know other articles similar to Fix: Can’t Connect to This Network Error in Windows 10 you can visit the category.
Facebook Comments
Disqus