Windows Solutions. Error: Please Insert Last Disc of Multi-Volume Set

Various error reports affect users of the Windows operating system, with version 10 being one of the ones with the highest recurrence of messages that can be generated by system failures, installation problems, malware, among other elements.

One of those errors is: Please insert the last disk of the multi-volume set, which pops up when you start Windows Explorer or try a search. Here we tell you how to solve this annoying difficulty.

1.- Know the meaning of the error message: Please insert the last disk in the multivolume set and what causes it

The pop-up window with the message: Please insert the last disk of the multi-volume setis a common error report in the Windows operating system, it generally emerges in version 10, it has also been evident in versions 8 and 7.

Its appearance manifests itself in various circumstances, the most common is that The warning appears every time the user tries to open one or more Windows Explorer windows or when performing a search process within the system.

Windows Explorer also shows the error: Please insert the last disk in the multivolume set, when connecting and trying to open a USB drive in the computer.

Read Also

This is because the system identifies the presence of a .zip folder (compressed files) corrupt, located in one of the drives of your computer. For this reason, this error is also often referred to as the Compressed Folders error.

But why does the system suffer from this confusion when detecting corrupted compressed folders?

There are several causes that lead to the error: Please insert the last disk of the multiple volume set:

• The error: Please insert the last disk of the multivolume set, pops up when USB drive is not formatted correctlythat is, under the FAT32 file system.
• It can also be produced by Total damage to USB controllers or failures with the driver.
• The actual presence of a .zip file that is incompletewhich prevents Windows Explorer from indexing the archive file.

Information issued by users has also shown that when the error: Please insert the last disk of the multiple volume set, is derived after connecting a USB flash drive, this has been used previously in system equipment .

What happens in these cases is that Mac OSX creates a series of hidden files on the USB drives, related to the of data for indexing and icons you require for your Finder application.

These files, stored in folders identified with the .zip extension, are mistakenly interpreted by the Windows operating system as corrupt elements and generate the error: Please insert the last disk of the multiple volume set.

Read Also

Errors such as Please insert the last disk of the multiple volume set are typical problems that can cause difficulties in your computer when a USB drive.

Therefore, the most important thing is that you are prepared to solve it and maintain the correct functionality of your equipment.

2.- Quick and easy checks to fix the error: Please insert the last disk of the multi-volume set.

Although when you press OK the error message: Please insert the last disk in the multivolume set disappears, the annoyance will persist throughout the session.

Even if you can apparently continue, your work will be hindered, as the message will appear constantly, making it difficult to execute the action you are currently working on and even stopping it.

There is a series of quick and easy checks to see if the problem goes away error: Please insert the last disk of the multivolume set:

• Try plugging the USB flash drive into different enabled on your computer equipment.
• Check the USB drive by plugging it into a computer running an older version of Windows.
• Restart your computer in safe mode, and plug the USB flash drive back in.

If none of these checks disappear the message, we invite you to execute the following error elimination methods: Please insert the last disk of the multi-volume set.

Read Also

3.- Solution Methods for the error: Please insert the last disk of the multiple volume set

Method 1: Format the USB flash drive

When the error: Please insert the last disk in the multi-volume set occurs when connecting a USB flash drive, you may need to reformat it under the FAT32 system.

Remember: Before formatting your USB drive, it would be advisable to move the important files stored on it. If you can open the drive, copy the files to your PC, another computer, or another type of storage drive.

To give the new format you must:

1. Connect your USB drive to any of the enabled ports on your computer.
2. Open the Windows Explorerlocate and click on Devices and units.
3. From Devices and unitsclick with the right mouse button on the USB flash drive to format.
4. Select the option Format.
5. When the window is displayed Format USB drive, Verify that in the box File System is the configuration FAT32 system.
6. Press and check the option Quick Format.
7. Press Start, The process for the new format will begin, wait for it to finish.
8. Copy the files back to your USB drive.

Note of interest:

• If you want to prevent the error: Please insert the last disk in the multi-volume set from appearing again when you use a USB drive in other work sessions, make sure you perform the eject action correctly.

To prevent corruption of stored files, each ejection of a USB flash drive should be performed as follows:

1. Press the usb icon in the Taskbar.
2. Select the option Expel.
3. Wait for him to emerge safe eject message.
4. Remove the unit USB.

But be careful, this would be an extreme solution with which by automatically formatting you would lose all the information stored on your USB.

Read Also

Method 2: Delete hidden .zip extension folders on USB drive

The error: Please insert the last disk of the multi-volume set can also arise from the hidden presence of (compressed) disks that may have been added to the USB drive when it was connected to another operating system.

In this case, perform the following steps to eliminate hidden compressed files:

1. Connect the unit USB to your computer.
2. Open the Windows File Explorer.
3. Click on the section See and select the option hidden elements.
4. Open the USB memory drive and place the files on it.rfiles whose name ends with the extension.zip.
5. If you do not recognize having stored said file yourself, you must proceed to delete it.
6. Steps 4 and 5 must be repeated with each of the files with a .zip extension saved on the USB drive.
7. Eject correctly the USB drive.
8. Finally Reboot the systemconnect the USB flash drive again and check if the error: Please insert the last disk of the multi-volume set is fixed.

Compressed folders (.zip) can not only be hidden on the portable drives that you connect to your computer, you can also locate them on your hard drive, there they can also generate the error: Please insert the last disk in the set of multiple volumes.

It is then necessary to locate these hidden folders on your computer’s drives. To start this elimination process you must enable option View hidden itemsin the following way:

1. Open the File Browser.
2. Click on the tab See.
3. Check the checkbox hidden items.
4. When activating hidden elementsyou must check each unit of your equipment.
5. Click to open each unit and files with a semi-translucent appearance, which include the .zip extension at the end of their name.
6. Click with the right mouse button on the suspicious file and select the option Eliminate.
7. You must repeat the steps with each drive on your computer.
8. Restart the computer and verify, opening the Windows Explorer, If the error persists or has been removed: Please insert the last disk of the multi-volume set

Method 3: Reinstall the USB drivers of your computer

As we already indicated, another cause of the error: Please insert the last disk of the multiple volume set, are failures in the operation of the USB controllers on your computer.

By uninstalling or updating these drivers you can solve the difficulty generated by the error.

Read Also

From the Device administrator You can perform this solution method, like this:

1. In Startadd the text Device administrator in the search bar.
2. Click on the search result, that is, on Device administrator.
3. When the window opens Device administratorlocate and click to expand the option Universal Serial Bus Controllers.
4. Press, with the right mouse button, the option Intel USB Host Controller.
5. Choose .
6. Press Automatically search for updated driver software.
7. Doing this will activate Windows Update for automatic search, download and installation of the latest USB driver update.
8. When the driver update is complete, reboot the system.
9. Check if the error persists or disappeared: Please insert the last disk of the multi-volume set.

Note: Another way to access Windows Device Manager is:

1. Press. Together, the keys Windows + R.
2. In the box Executionwrites: devmgmt.msc.
3. Press Enter to open Device administrator.

Yeah Windows Update detects that you already have the latest USB driver update in use, you must run full uninstall of universal bus controller in it Device administrator and reinstall it, for which you must do the following:

1. Repeat steps 1 to 4 of the previous option.
2. Click with the right mouse button on Intel Host Controller.
3. Choose Uninstall device.
4. Press Accept to confirm the uninstallation.
5. Upon completion of uninstallation reboot the system.
6. The Windows operating system (Windows Update) will automatically reinstall the Intel Host controller drivers.

Method 4: Run Windows OS Troubleshooter

From the Windows operating system Troubleshooter you can detect and resolve the problem caused by the error: Please insert the last disk of the multiple volume set, as follows:

1. Click on Start and select Setting.
2. Select the option Update and security.
3. Click on the…