【ACTIVATE USB Debugging Mode】▷ Step by Step Guide ▷ 2022

USB Debugging mode is an option available on Android phones that allows the user to manipulate the device from the PC with more freedom than usual. Bypasses security restrictions imposed by the smartphone’s operating system and thus open the doors completely to change software or make important modifications to the terminal.

Currently, it is something that is widely used when developing apps for phones, since it allows faster and easier transmission of files. It is also of special interest in case you want install custom roms, rare software or enable root user to have special permissions. It completely removes the protection so that working on the mobile from the PC is much easier.

To have this mode, it is first necessary to enable it, and that is something that not everyone knows how to do. If you have problems and want to find out how to enable usb debugging mode, we are going to explain everything you have to do with this step-by-step guide. So even if your phone has a cracked screen and nothing can be seen or doesn’t work, you can enable USB Debugging and make the most of it.

Steps to enable USB Debugging on Android devices

In case you need it, the steps to enable USB Debugging on android devices They are the ones that we will explain below. However, we anticipate that you will need a computer and a minimum of computer knowledge. Otherwise, it may take a little longer than it should.

Next, we explain how to proceed from a PC or with a broken screen:

from pc

In case you want to use the PC to carry out this authorization, you have to use a program similar to Debug Tool with ADBalthough this makes more sense when the terminal is from the Samsung brand. It is necessary that you gather a series of files and that, in addition, follow the instructions that we are going to give you.

*Note: In case your phone has a Qualcomm processor, skip these steps and go to the next ones:

• Download the program Miracle Box From the links that we provide you, they are 100% safe.
• Once you have downloaded and installed it, you have to open it on your PC with administrator permissions. Right-click on the executable file (.exe) and, within the drop-down that opens below, click on “Execute as an administrator”.
• After you’ve done this, it’s time to connect mobile phone to computer. Don’t worry if it’s on, it should be.
• Now, in the program that has been opened on the computer, you have to choose the type of make or model of processor that you are using, we recommend the latter. Just click on the appropriate tab.
• In the same way, below you have to click on the tab “Extra” to open its corresponding settings panel.
• Within this menu, you will see that there are several options and one in particular that interests us: “Open Usb Debug”. Click on the box for it to check it.
• Now make sure below that “USB Cable” is checked and, then, see that the two fields under the settings of point 6 indicate, in the first, the exact range to which the CPU of your smartphone belongs and, in the second, the option “Universal”.
• After checking all this, click on “Start Button” and let the program work.

*Note: As we have indicated before, if the processor of the phone belongs to the Qualcomm brand (as with most Samsung), you have to follow a different procedure.

This is what you will have to do:

• On your PC, download the program Android Diag Enabler from the links above.
• When you have downloaded it, unzip the file in the one that comes in the folder you want (right click, “Extract here”, “Extract in…” either “extract”).
• Now, access the folder where it is and, instead of opening the program, go for another one called “adb”. Indeed, it is the ADB Debugging Tool. You have to open it.
• Then, when the brief loading process is finished and the window closes, run “Android Diag Enabler Universal”the other executable available in the folder.
• The moment the window opens, connect your phone via USB cable to PC (doesn’t matter if it’s on).
• After doing so, you will see that all the content closes on the screen with the phrase “Make your selection and press Enter”. There, you have to press the key “1” from your keyboard and then hit “Enter”.
• When you have done so, a procedure will begin with which the whole program will start and USB Debugging will be activated. If you want to continue with another phone, connect it now and press “two” in the new window.

With black or damaged screen

If your smartphone has a broken screen, it is practically inoperative and you will not be able to do anything with it. In this case, the process you have to follow falls on use the pcso the best you can do is Go back to the previous section and follow each and every one of the steps.

If you are not sure if the terminal is on or off, what you should do is remove and install the battery if possible. In case you cannot do this, keep the button “power” pressed until it vibrates. You will have to remember which vibration corresponds to turning off and which to turning on.

From recovery

Currently, there is no method to enable USB debugging mode from recovery. The only possible options are through the “Settings” of the smartphone or, failing that, carrying out all the steps that we have indicated in the first section of this section.

The recovery menu, accessible by performing a button combination when turning on the phone, has a large number of options; but none of them are related to validate USB Debugging or disable it.