Burning to CD was something that was done very frequently, since there were not so many ways to save information. However, as everything has evolved, it has been forgotten by some people. What happened is that the content we needed to store was getting heavier and it has a very limited storage capacity.
Despite this limitation, on many occasions this is the best way to store information, since it is extremely secure. Being a read-only device, it does not allow data to be overwritten once it is burned for the first time, so it is almost impossible for a virus to contaminate or damage it. That is why it is convenient that you know how to burn a CD from your computer.
In this guide, we will teach you as precisely and clearly as possible. the steps you must take to burn a CD from your Windows or MacOS computer. You will learn how to do it with and without external programs, so no matter the circumstances, as long as you are prepared to make the recording.
Steps to burn data, files or programs to a CD or DVD for free
Although most people use the flash drive to store their information, there are still many people who prefer CDs, so it pays to know how to burn them. So if you need to share documents, photos and videos with someone who doesn’t have a lot of technology, you know how to do it.
It must be taken into account that these have a limited capacity when it comes to archiving, since they are measured in Megabytes (MB) and can save about 700 MB, which would be like 80 minutes of music. the dvds They have the same format as Blu-ray, these are calculated by gigabytes (GB) and they can collect up to 4.7 GB.
With Windows 10, 7 or 8 without programs
You can burn CDs or DVDs without having a program installed in Windows, it is very easy to do. You only need a recorder unit; that usually comes with all the computers, a blank disk; try to buy a recordable one (CD-R) so that it is compatible with any hardware, and the information you want to copy.
Once you have this, perform the following steps:
- The first thing you should do is insert the blank CD and/or DVD into the reader disc or recorder.
- You will see that when you do it, a box will appear on the computer screen indicating that it has already been read, Close it and go to Windows Explorer.
- You can enter through the main menu; find where I tell you “Equipment” or through the command “Windows + E”this will send you directly to the window you need.
- There you must enter “DVD RW drive.”
- When you click on it, a window opens to generate a new disk, you will see that it gives you the option of giving it a name. Below you have two alternatives that determine how the disk will be used on the computer, if it is “As a USB flash drive” either “Like a CD or DVD player”, in this case select “USB flash drive”. Since what you are looking for is to save data. After you have completed that, press “Following”.
- The computer will begin to process the information you entered, then you will see a popup window with the changes you made, close it and return to Windows Explorer.
- Now you must look for the file or the information that you want to save on your CD, you must select it and right click on it, this will display a menu where you must choose “Send to”.
- A submenu will open in it you must search and choose “DVD RW drive.”
- After this the process to save will begin the information you are passing to the CD.
- If you want to save more files or data on the disk you can do it by sending one by one as you just saw. Also selecting a file and pressing the ctrl key and with the mouse mark the others without stopping pressing (CTRL). The step is repeated “Send to” and find the destination.
- at the time of completion, you should go to your windows explore and locate in the section of “Removable storage devices” the CD device. Right-click on the popup window that opened and search “Expel”. Do it this way so that it will not present any errors when reading it on another computer.
With a Mac computer
You have to keep in mind that when CDs or DVDs are used as storage devices you won’t be able to delete any files to free up space, so make sure you buy a blank one. It is not recommended that it be formatted, since it may remain a trace of information and it may present an error at the time of recording.
To find out how to do it, continue reading:
- Enter the CD or DVD without data on your recorder or hard drive.
- Once the disc has been read, a box should appear with some options, where it asks you with which program you want to open it. Choose Finder which is the one that brings by default and presses “To accept”.
- Next, you must enter in the sidebar of the program an option called “Untitled CD”.
- Drag the music you want to copy to the blank window. You can also do it by selecting and pasting it into it.
- After having chosen the songs, you must click on the top of the folder where it says “File, Archive” and select “Burn untitled CD”.
- Subsequently, a box with several options should appear, one of them is for you to add the name to the disc, the next one is for you to choose the speed with which you want the information to be recorded. We recommend that you do it in 2x, which is a normal but optimal resolution for MP3 files. The last one is a selection one, in case you want to create a backup folder with what you are saving on the CD.
- It only remains for you to give “Engrave” and he will begin to process the information. Please note that this may take a few seconds. depending on how much music you are saving. In addition to going through a verification process.
- before finishing you can make some custom settings on the recording, in order to obtain better quality.
- Once it is verified and recorded, the box will be removed and all that remains is for you to eject the disc. It should be noted that the discs that you record with the Mac, you can use them on other computers that are not from Apple.
How to burn MP3 music to CD or DVD on Windows or Mac?
You already know how to save information to a disk, but do you want to learn how you can or ? In this part we will teach you how to do it easily from your computer. You do not need to download a program, because you can do it from the equipment’s own functions. The best of everything, from any operating system.
In Windows 10
If you want to free up space on your hard drivebut you don’t want to delete the music you have on it, maybe you’d like to burn it to a compact disc so you can make a backup and not lose anything.
You can copy them in MP3 or WAV format directly from Windows using the player that comes by default, “Windows Media”.
- The first thing you should do is insert the CD into the recorder, or in the optical band tray of your computer.
- If the disk is not virgin, format it so you can do it. If, on the other hand, it is a rewritable one, you can use it No problem.
- Look for the “Windows Media Player”. Once it opens, locate in the upper right part of it the option to “Engrave”. A window will open to add the tracks you want.
- To do this, find the folder where you have the music you want to burn to the CD and drag it to the burning list. Remember that the tracks will only support one format (WAV or MP3).
- At the top you will see an option that tells you “Start recording”click to start the process.
- After having concluded the disc will eject automatically.
On a Mac computer
Despite the fact that it is a system that not everyone uses, those who have it think that it is a complicated task. But the truth is that Apple is responsible for making the most difficult thing very easy. So If you find yourself with a Mac computer and you don’t know how to save music on a CD or DVD, just follow these simple steps so that you can do it quickly and effectively.
- In the iTunes app on your Mac, create a playlist in order to facilitate the fact of copying the music on the CD.
- Insert the CD into the recorder from your computer.
- Select the list and go to “File” > “Burn playlist to disc”.
- If this option does not appear, it means that it cannot be copied because it contains usage restrictions, or has a format that is not supported at the time of transferring the tracks.
- Then click “Devices” > “Import CD”.
- Choose a disk format and click “Engrave”.
List of the best programs to burn files and documents to a CD or DVD for Windows and MacOS
You already know how you can do this from your computer without having to download a program, but if it’s something you do often, you have some offer you better performance and work when you want to pass the information to your disk.
Although it is no longer so common to do it this way, there are numerous offers on the internet to do it. That is why we in this part We will mention some of the tools that are available for Windows and Macwhich will allow you to test the software and decide if it is worth it or not.
Express Burn
This is a program for Windows in which you can save a lot of time when passing data and information. It supports CD, DVD, HD-DVD and Blu-Ray, even this one helps you to burn images and create ISO files on the disk, since it accepts all formats as AVI, JPEG, WMV, MP4 and more. The disadvantage of this tool is that to obtain some of its functions it is necessary to have a Premium version.
CDBurnerXP
This is a program that helps you and facilitates the work of creating data, audio and image discs. It is completely free and works for Windows. This software also allows you to work with CDs, DVDs and Blu-Ray to transfer music, videos and files in general. It reads ISO images, allows you to copy information from already recorded discs and delete multi-use or rewritable discs. It supports formats MP3, OGG, WMA and WAV, ISO, NRG and BIN.
BurnX
This program is a CD and DVD burner for Mac, it’s totally free and it has a very simple interface that’s easy to use. BurnX allows you to burn CDs with optimal quality and quicklysince it brings a processor called “Captain” that allows you to copy the information just by dragging it to its interface. Work with formats MP3, MP4, FLV, AVI, among others. It should be noted that it offers the possibility of erasing CD-RW discs, recording in HFS+, ISO9660 and Joliet for greater compatibility with other platforms, in addition to Macintosh.
Burn
This software is very different from the previous one so don’t get carried away by the names. This program is only available for Mac and has a very good reputation among users as one of the best. It allows you to save any type of file and even make backup CDs for your computer. It is also compatible with three…
Facebook Comments
Disqus