【 Configure Windows 7 From 0 】 Step by Step Guide ▷ 2022

was not an easy task before, however, nowadays this process has been done much easier and simplerwhich can be at anyone’s reach without the need for it to be a computer expert.

But when I know install windowsit is important that once it is finished, what is operating system settings. This is done with the aim of ensure excellent performance as well as improve your security and privacy.

That is why here we are going to teach you what are the main steps What do you need to do to start configure your W7 after its first installation. To do this, follow in detail everything that we will explain in the post.

Things to consider when setting up Windows 7 for the first time?

When are you going to install w7 it’s necessary that your computer has some minimum requirements for the installation to be successful. In the event that they do not have these requirements, then it is best that you choose to install a previous version such as Windows XP or Vista.

The minimum necessary requirements are the following:

1 GHz 32-bit or 64-bit processor.
1 GB of RAM for 32-bit versions or 2GB of for 64-bit versions.
graphics card with support 9 and with WDDM driver 1.0 or higher.
16GB of space on the hard drive for 32-bit versions or 20 GB of disk space for 64-bit versions.

If you meet each of these requirements then you can proceed to run w7 setup. Once you have installed it, it is important that you perform the configuration of the samein order to increase both privacy and system security. For this, it is necessary that you take into account some aspects that we teach you below:

Windows controls the data you send

As usual, The Microsoft operating system usually collects the data you send in order to make different diagnoses at the time of a problemhowever, you can prevent these shipments from being saved through Windows settings in the privacy section.

Configure apps that use your advertising ID

All Microsoft users often have a unique identifier that you can share with other apps so they know what type of advertising they can show you Therefore, here you can choose which apps you want to have it and which you don’t or simply disable it for all of them.

Control the content of your language list

Usually when you enter a website, these can access your list of languages configured in the operating system so you can know which ones you use and show you the content depending on that information. therefore you can modify it and avoid that these websites have access to them.

Other factors to configure

You may control what they access each of your applications there installed.
You may set up a VPN or Proxy for one maximum security.
You may delete what Microsoft saves on its servers about you.
Check the section Windows search and history.
control what cortana can store about you.

Steps to set up Windows 7 after the first installation

Once you have installed W7 on your computerthe next thing you should do is start with operating system settingsfor this you must make three specific pointsone of them is the configuration of the OS taking into account the aspects mentioned above, you must also configure what is the disk partition and Install OS. In this way, here we explain a little more about each of these methods that you must perform.

Partition the disk

When a disk partition basically it is done to be able better manage and organize your hard drive space at the time of save files and documents. In these types of cases it is recommended to use one partition as the primary while the other can be left for save less important files.

This allows you to have a little more securitysince if one of the partitions is affected by a virus, the rest of your files will still be safe. In addition, it is important to mention that today there are a large number of programs to make this partitionbut it is best to use the one offered by default windows 7.

To carry out this process you must follow these steps:

The first thing will be to go to “Control Panel” and there you select the category of “Security system”.
Inside the folder you must click on “Create and format hard drive partitions”.
Here you will open “Disk Management” where you will be able to create and edit the partitions.

In this way, the “Disk Management” it will show you what are the capacities of your diskas well as the free space on it.
In this case you must divide into two your main partition. To do this, click on the right button of your mouse and select the item “Dicrease the volume”, there you will be shown a “Checking how much space you can free” notice.
Finally, a window will appear where you will be told the current size of the partition and the space available on it. You will also see a space for you indicate how much space you want the new partition to occupy.
Therefore, you must indicate the desired size and apply the changes for so create w7 disk partition.

install OS

Once done what is the disk partition processyou should start with the final installation of the OS for this you must perform the following steps:

Once the partition is created, it will begin to perform Windows installation.

Keep in mind that while the process is being carried out, the system will reboot several times. Every time it restarts a new wizard will start so you can continue with the installation process. This procedure usually takes a few minutes.

When it’s all over the installation process A new window will appear where you must put the name of the user and the team. Once this is done, click on “Following” to continue.

Now one will appear new window where you should select the password for the username you entered. You must also write an indication of the password that reminds you of itThis is in case you forget. When you have completed all these boxes click on “Next”.

After this you will be asked Windows product key. In case you have it, simply add it and click on “Following”.
If you do not have it, then you must uncheck the box “Activate Windows automatically when you’re offline” and click on “Following”. In this case you must enter said activation code within 30 days so you can continue using The operating system. East trial period or thank you you can reach it extend for 90 more dayswhich will give you a full 120 days without activation.

In the new window that appears you will be asked if you want install only security updates and updates that Microsoft deems important or if you just want use the settings recommended by Microsoft. You must bear in mind that this can be modified after you have w7 installed. Select one of the two and click on “Following”.

The next thing will be to choose the system date and time and click on “Following”.

Next you must choose the network configuration that your system will have, in this case you must select “Home network”, “Work network” or “Public network”. For this process we select the first one.

Once this is done, it will begin to Load all the data that has been previously configured.

When all this finishes loading, setup process setup will be finished and how can you appear in screen the desktop of W7.

configure OS

Once you have installed complete the W7 OS on your computerthe following will be to perform the configuration of the same. In this case you can modify various aspects to improve the operation of the system or increase its security and privacy. Some of the tools you can edit are as follows:

Enable the launch bar on the taskbar

In the case of W7 OS the quick launch bar is not activated on the taskbar, so you will not be able to see said tool there. However, power changing this setting is very simple, To do this you must perform the steps that we will explain below:

Right click on the bar “Quick start”.
Now in the toolbar you must select the item of “New toolbar”.
Here a new window will open where you are asked for the location for the start bar, in this case you must copy the following address: %userprofile%\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch.
Finally, with mouse help you must point out the separator that appears in the task bar and slide it to the left. next thing will be customize icons, color, text, To do this, right click on the bar and modify each of these aspects.

Open Explorer as in previous versions of Windows

One of the main problems when updating windows version is getting used to its new functions. In the case of w7 when the open explorer shows librarieswhich ends up being very practical in comparison to previous versions, but you can set it to keep opening as in previous versions.

If you want the browser is displayed as in previous versions of Windows XP or Vista, then you can do it like this:

The first thing will be to right click on the explorer. There you will see a dropdown menu with different options.
Here you must select the item “Properties”.
Now in the destination option you must copy the following address: %SystemRoot%\explorer.exe /root,::{20D04FE0-3AEA-1069-A2D8-08002B30309D}.
In this way you will be able to enjoy this tool just as you were used to.
In case you want return to default settings then you must repeat all the steps mentioned above and copy the following address: %windir%\explorer.exe.

Add delete, copy and paste buttons to Windows Explorer

On many occasions when driving windows explorer buttons are used “Copy”, “Paste” and “Delete” very frequently, either to move a folder from one place to another or to delete those that are no longer needed. In this way it is a very good option to have these options at hand.

In order to apply this configuration, you will need to perform these steps:

The first thing you need to do is access the following registry key:…