Currently, as far as the maker world is concerned, He is one of the main promoters of this movement. that represents the culture DIY globally. Since it is a hardware and software development company that offers numerous alternatives for develop projects of interest based on your different board models and your IDE.
This is why, today, more and more people are joining the extensive Arduino community that shares numerous ideas, from the simplest to the most advanced. Taking into account that, with everything that Arduino offers, the only limit is your imagination and your desire to learn to start any project of electronics, mechanics, robotics, home automation, etc..
However, among the most important components to carry out these projects, is the famous Arduino humidity sensor that offers the possibility of making small prototypes with absolute quality. But, at this moment, there are many users who are unaware What is it for and how is it used?so we will explain this information and more, below.
What is a humidity sensor and what are they for on Arduino boards?
In general terms, humidity sensors can be defined as those devices that are able to measure relative humidity or liquid level in a certain area. Thanks to that, they are ideal for tirelessly controlling air humidity and temperature. In general, the magnitudes computed by these sensors are converted into an electronic signal to simplify such measurement.
However, in the different models of plates of Arduino, humidity sensors are responsible for calculate the soil moisture by the variation of its conductivity. In this way, they are applied to be able to detect the level of liquid contained in a tank and even, used in irrigation systems to control them in order to detect when the plants need watering and when they don’t, for example.
What are the main uses of humidity sensors?
While it is true, above, we provided you an appetizer of the utility that humidity sensors reveal at the integral level and thus, the different projects that can facilitate. However, it is important to detail the main uses of these devicesto emphasize its importance when implementing ideas based on Arduino with these sensors.
Consequently, through this section of the post, we want to introduce you to the most important functions that humidity sensors present:
- They are especially useful in hygroregulable mechanical ventilation systemsThanks to the fact that they manage to regulate the flow of renewed air depending on the ambient humidity.
- Allow measure moisture in various materials. Such as: cement, coal, cereals, rice, plastic granules, biomass, coating masses, among others.
- These sensors are essential for conserve moisture in some particular areasin order to meet certain specific objectives.
- They provide the necessary features for build small prototypes with the help of the different plate models Arduino.
- Help to control liquid level in production systems to ensure optimal operation.
- They have the ability to domotize the homemaking use of some centralized control device.
- They are also sensors that allow ensure the timely operation of air conditioning, heating and ventilation systemsboth privately and industrially.
Learn step by step how to use an Arduino humidity sensor from scratch
Before connecting a humidity sensor to the Arduino, It is important to take into account some considerations. Since some boards can present problems if they are powered by an intrusive battery because cannot supply the necessary voltage.
Thus, among these considerations, the most relevant refer to:
- It is essential to make use of a specific resistance according to the length of the cable to be used. For example, if you want to use a cable of up to 20 meters, it is advisable to use a 5K Ohm pull-up resistor. So if you connect a larger cable, the pull-up resistor will have to be proportional to it.
- The voltage with which the humidity sensor will be powered, must have a suitable power cord so as not to cause a malfunction due to voltage drops.
- So, for example, if it is powered with 3.5V, said cable must not exceed the 20 centimeters.
- When taking action, it is recommended to do it every 5 seconds. Since, if a shorter or excessively longer period is taken into account, the data obtained will not be accurate.
Next, it is time to carry out the sensor connection through its output which is a 0 to 4.2v, as usual. Which allows the information it provides to be read as an analog signal. Taking into account that, to connect it, simply you must make use of one of the inputs of the Arduino board at the bottom.
As we show you in the image that we present here as an example:
Apart from that, you should have on hand the code of the project to be carried out with the humidity sensorto insert it into the. This, initializing the serial port to see the result provided by the Arduino serial console that allows you to observe it in a quick way. In this case, you should use the function begin to initiate communication with the serial monitor and use the function “print” to write each line.
Then, when you upload the code to the Arduino board in question, it is possible to see the serial monitor via the keyboard shortcut “Ctrl + Shift + M” or by accessing “Tools/Serial Monitor”. After that, it is time to read the value of the analog port (generally, it fluctuates between 0 to 1024 to 10 bits in analog reading) and through the output value table, it will be possible to determine the humidity of the study area.
The best Arduino projects with humidity sensors that you can do yourself
To conclude, we believe it is of great interest to show and detail which are some of the that have been implemented with the help of humidity sensors. Well, starting from them, you will be able to start your own projects in the maker world and give the Arduino board that you want a great utility.
Therefore, next, we will mention 5 Arduino projects using humidity sensors:
an advanced gardener
It consists of a planter that It has an integrated Arduino microcontroller which runs inside the garden and exhibits the ability to watering plants whenever they need it (when they are thirsty) and even, manage to turn on some artificial lights that fulfill the function of natural sunlight. In addition, it can also alert the owner if the temperature drops below a level that is healthy for plant life.
Thus, it refers to an autonomous garden system based on a plate Arduino that operates with several sensors, among which is the humidity sensor and these, make use of a thermistor (for temperature), a cheap photocell (for light) and a couple of galvanized nails (for humidity).
By means of which, users should not worry for not complying with the regular schedule to water the plants and expose them to light when required. Taking into account that it is a project that is economical, given that does not require more than 150 euros and thus, it controls the humidity, the temperature and the light that the planter receives automatically.
On the other hand, to start with this project, you must have the microcontroller at hand and proceed to plant your garden as it is done conventionally. Subsequently, make the humidity sensors and connect them to the Arduino board to proceed to upload the sensor test code. Next, it is time to link the light and temperature sensor to connect the corresponding relays in the power cables and attach an LED to the Arduino. Finally, configure the irrigation and lighting system.
virtual pool monitor
This is a project that facilitates the control of the state of a swimming pool by calculating the pH and temperature of the water in this. Since it is a pool monitor that stays connected by measuring the quality of the water and exporting the data in real time to send wireless updates to users. That way, people will know when to add pool chemicals.
Luckily, this project carried out with the help of the humidity sensor in Arduino, eliminates the need to use test strips or even guess when the pool water is clean or not.
For this, the virtual pool monitor must make use of the following components or materials:
- a sensor of humidity.
- a temperature sensor Permanently.
- a pH probe and an ORP probe.
- An Arduino microcontroller which is the core of the system.
- an LCD screen showing the current state of water quality.
- A local web servera WiFi or a Bluetooth to send wireless updates to the user.
Automated urban garden
It refers to a project similar to that of the advanced planter, given that, takes care of watering the plants of an urban garden automatically when collecting data from it to know when it is appropriate to do so in order to maintain your healthy life. Thanks to this information, you will be able to maintain an orchard with less dedication and in the most appropriate way possible. For which, mainly, an Arduino board is needed to control the entire system.
For its part, this urban garden also requires several soil moisture sensors that help to control the state of the gardens at all times. Thanks to the fact that they have the ability to compute the conductivity from the soil matrix, taking into account different environmental factors (temperature, dissolved solids in the water and soil pH). Through these sensors, the analog inputs of the Arduino they will detect the voltage drop in order to know the state of the orchard and water it as long as necessary.
An environmental conditions meter
Starting from an idea to be able to measure environmental conditions, this project was created based on a circuit that focuses on computing humidity, temperature, barometric pressure, luminosity, and relative altitude. In this sense, the meter shows the data collected through an LCD screen in real time in order that each person knows the conditions of the environment that surrounds him at a given moment.
In this way, the environmental conditions meter emerges as the prototype of a series of projects based on censusing data through environmental conditions so that people can use the information provided with great utility.
Now, in order to carry out this idea, several materials are required such as:
- .
- a sensor temperature DHT22.
- a sensor quality moisture.
- a sensor BMP180 Barometric Pressure Monitor.
- a photoresist LDR.
- A battery 9 volt.
- a potentiometer of 10K.
- A plate universal perforated
- two resistors of…
Facebook Comments
Disqus