One of the most common and repetitive problems in Its the the black screen, This usually occurs for different reasons, although it mainly occurs after apply some updates in the system. With the latest W10 Microsoft update has tried to greatly reduce the problems generated in previous versions.
However, this is not over yet. achieve 100% and that’s how it still is computers with W10 continues to present various types of problems that have been dragging on since previous versions. the black screen has become common in this last version after users perform the latest Windows updates, causing so the screen turns black or white.
When panel turns blackit becomes empty where it cannot be appreciate neither the icons nor the taskbar and prevents the person from using the machine for about 5 to 20 minutes. In accordance with this, here we will teach you a little more about what this type of error is about and how you can solve it, for this, follow everything that we will explain in detail below.
What is the black screen on my Windows 10 operating system?
This type of error does not usually occur very frequently on the same computer, but it is possible that an error occurs in the system that ends up causing it to be displayed black or white color panel. This usually occurs when there are display connection issues, update issues, issues with display adapters, or the latest updates or installations on the system.
It is like that on many occasions the updates that are installed on the computer periodically can cause some type of failure in it. The most common, the black screen, which will prevent the person from use the machine for a few minutesas it disappears completely icons and taskbar.
Fortunately, this kind of drawback is not usually fatal to computersis like this through some how many steps we will indicate later you will be able fix this type of error on your PC with W10.
What are the main causes of the black screen in Windows?
Surely it has happened to you that you have turned on your computer and suddenly the panel has been completely black or white for a few minutes and prevents you from carrying out any type of activity on it. This type of bug in w10 It can be due to many reasons.
Here we show you the main causes of this problem on your PC:
A bad connection between the monitor and the computer
When these types of problems occur, it is very important to be able to verify that the monitor switch is onsince this will allow to know if the same is connected to the current. As usual, monitors are usually connected to the computer via a data cableif it is not well connected or is making a bad contact, possibly you will not see any type of image on it.
If it’s a old computer keep in mind that this type of cables also oxidize over time or may suffer sheet music along itall this can cause not no image is reflected but only the black screen. If everything is connected correctly and the issue persists, then it may be due to a hardware issue.
hardware problem
On many occasions these types of errors are usually due to problems that are generated through the hardware. In this case lips makes self tests where will emit a sound as a warningand depending on the type of sound you can tell what kind of problem it is.
When they are generated constant beeps it could be the memory module that has been damaged or it is simply loose. Now if you hear a long and two short beeps then most likely there is some contact of damaged monitor or graphics card.
A bad contact between the memory, monitor and graphics card
When there is a poor contact between some of these elements the percentage of the error occurring black screen on windows is very high. For this it is important to verify that the contact of the memory module is good, if it is loose or if the contact that exists between screen and graphics card is it in good condition or not.
It is also important to check that the contact between the slot and the graphics card is in good condition, since otherwise it will cause failures. If necessary, you must remove and reinstall to make sure everything stays well connected and working correctly.
The memory module, graphics card or monitor is damaged
In the event that there is no contact problem that may be generating the error, then it is possible that graphics card, monitor or module of the memory are damaged. In the event that this is the case, you simply must replace the one that is deteriorated to correct the failure. usually when W10 starts with black screen and then works fine, It is because one of these elements has some kind of error.
external devices
In many occasions the computers remain configured to boot via a USB device, in some cases these external devices to the equipment may cause black panel at the time of booting Windows. Therefore, if your machine presents this problem, it is necessary that you review all these devices and remove peripherals to see if this is corrected.
If the laptop battery is not working properly
When the battery usually presents some kind of problem in its operation can cause this problem to originate as well, thus getting the laptop also stays with black screen for few minutes. In this case you should make sure if the problem is in Battery and in such case you should replace it with a new one.
MBR/DBR hard drive problems
Everytime that computer startsthis happens to read what it is the MBR/DBR boot code, if this code starts to have problems or just stops working, you can cause it to appear panel in black every time I know start W10. In this case it will only appear the cursor blinking in one of the upper corners until the error disappears.
Steps to fix the black screen if it appears before starting my device
The most frequent case of black screen is when computer starts and even though Microsoft has made this problem already official, no official solution for it has been offered yet, although there is a way to try to fix itbut it is necessary for the user to have minimum knowledge of computers.
Therefore, while the solution arrives from Microsoft for this type of inconvenience, here you we are going to teach a short procedure that you can apply if your computer is presenting the black screen, To do this, follow each of these steps that we will indicate below:
- The first thing will be access Regedit and there you should look for the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx\AppxAllUserStore\Applications
- Here you must locate the keys that begin with the following words: NET Native Framework, NET Native Runtime, and VCLibs.
- Now with the right mouse button you will select the option “Remove”. This step must be repeated until manage to eliminate all those options that contain similar names to those mentioned above. It is important that you are very attentive to everything that you delete, Because if you delete something you shouldn’t, you could cause other inconveniences on your computer.
In the event that you do not want to perform the previous method because you are afraid of deleting something you shouldn’t, then you can also try these Three ways to solve this problem:
- The first thing will be reboot the pc in safe modethere you must press the key combination “Windows + C” and choose the option “Setting”. then you must change pc settings and there you select the option “Update and Recovery”. The next thing will be to select “Windows Update” and there you choose “View details and check for updates”, in such case there are pending updates you can install them.
- Another way to try to fix the problem is disconnecting all external devices and rebooting the machine. Keep in mind that these types of devices can often be responsible for this errorif you manage to detect that some of them is the problem, avoid continuing to use it.
- Finally, you can press the key combination “Ctrl + Alt + Del” for you to start “Task Manager”, here you must click on “File, Archive” and then in “Run new task”in this case you must enter “explorer.exe” and you press the key “Enter”.
Get rid of the black screen that appears before restarting your Windows 10 PC
On many occasions this problem is generated when you want to Restart the system and ends up placing the black screen with the cursor. At this point, you may end up thinking that your computer has been damaged and you have lost all the information contained in it. However, when this happens, all that remains is to make an alternative to try to solve this problem.
To do this, simply follow each of the steps that will be indicated below:
- If the panel has gone completely black and you only see the blinking cursor, then the first thing you should do is access the “Task Manager” for this you must use the following keyboard shortcut “Ctrl + Shift + Delete” and in the options that are shown on the screen you must choose “Task Manager”.
- You will automatically be shown a window with all the programs you have open on the system. Here you must select the option “File, Archive” located in the tool bar At the top of the window, in the drop-down menu you must choose “Run new task”.
- In the new box that appears on the screen you must write “CMD” This will be the code that allows you to access the tool “Command Prompt”. Here it is important that you check the box “Create this task with administrator privileges” and finally click on “To accept”.
- This will allow the “Command Prompt” be shown to you in “Admin mode”. Once at this point you must write the following command “sfc /scannow” and you press the key “Enter” for the command to be executed.
- This will make everything your hard drive be Scanned by the system in search of possible errors. In case of finding a error or several errors the system it will correct them automatically.
- Once all this has been corrected, the next thing will be to go to the system registry editor, since during installations and updates in that place is where is the windows key stored. When the black screen It means that something is not working correctly and it may be because there is not…
Facebook Comments
Disqus