from a while back the plates have become one of the most interesting technological tools for users, especially for all those followers of The electronic what do they want create and develop different types of hardware and software that allows them to carry out a function in real life.
Arduino is a platform of free hardware which is mainly based on a microcontroller with input and output port in this way you will be able to start automate your home from your computer. Currently they can be created all over the world where many of them will help you to turn your home into a “smart home” without having to contribute a lot of money for it.
If you are passionate about electronics and programmingso here we are going to teach you What are the best Arduino home automation projects which you can use to start turn your home into a smart homein this way you can control several factors of them without having to do it manually, To do this, follow in detail everything that we will teach you next in the post.
List of the best Arduino projects to turn your house into a Smart Home
Being able to have a smart home will bring you many benefits in your life, and there is nothing better than getting home and the lights turn on by themselvesthat you can control the heating from your smartphone, that the radio turns on by itselfcan open the door of your house with your fingerprintamong many other actions that you can automate your home through an Arduino board.
This is how thanks to these microcontrollers and some other components users can start turning their home into a “Smart home” in an easy and fast way. This is how we are going to teach you next What are the best Arduino home automation projects that you can start apply in your home.
To do this, follow the list that we will show you below:
Fingerprint reader to open the doors of your house
One of the main advantages of these microcontrollers is that they will allow you change the locks of your house for fingerprint readers, this will allow you to enter it in a much Safer and above all it will prevent you from using those locks that are often quite difficult to open. In order to carry out this project, you will simply require a reader of fingerprint, transistors and a batteryOnce you have these, you can install it at the front door of your home.
You have to keep in mind that it is not a very easy project to execute, but with dedication and a lot of patience you will surely achieve it. In addition, it should be mentioned that this fingerprint reader will provide you with a maximum security for access to your homeso it will prevent strangers can access it without your authorization. This procedure will allow you to register a unique fingerprint that will be the only one capable of activate said sensorideal to activate also in the doors of the roomsthus achieving maximum privacy.
A pet food dispenser
This project is ideal for all those users who have pets in your home, this is a form of power provide food from time to time automatically, ideal for when you have to go out traveling for a few days and you have no one to leave them with. The process to build this automatic pet food dispenser is not very difficult, for this it will be necessary to get two cans, a food container, a servo motor, a power supply and a button that the pet must press.
All this will allow you Feed your dogs or cats in a very simple way. In the case that you want this food dispenser provide the food itself without your pet having to press a buttonthen you must add a internal clock.
This will allow you to configure so that the dispenser only dispenses food in pre-specified hours, this will prevent your pet from consuming food from time to time. In this way, thanks to the Arduino board, many users have been able to simplify the feeding process for your petsbeing very useful for those cases where their owners must be away for a few days.
Open the curtains automatically
Most people have the habit of getting up in the morning and automatically open the curtains in the room or living room in order to see how the day is, this will allow them to know if it will be a sunny or rainy day. However, thanks to this electronic board, users will be able to carry out this process without having to use their hands and what better than being able to open the curtains while still lying on your bed or sitting in your living room.
To be able to see the development of this project in detail, you can do it through https://www.instructables.com/Home-Automation-Drapes/ Keep in mind that for this it will be necessary to have a arduino board, a pulley, a servo motor and some other necessary materials for it. All this will allow the curtains to open or close on their own when a switch ordered themyou can also configure it to be open by itself at certain times acting as an alarm clock.
A smart trash receptacle
garbage receptacles on many occasions they end up becoming a real problem at home, either because the pedal to open the lid is damaged, because the lid gets dirty with the same rubbish, among other reasons that may not be very pleasant for people. Due to all this and many other things some Arduino developers decided to develop a project smart trash receptacle.
For the elaboration of the same, the users will need to have a dustbin, a servo motor, an Arduino nano board and an ultrasonic sensor, This will allow you to achieve the lid of the container opens by itself when it detects that your hand is a few centimeters awaythis will allow you to throw the garbage into it without having any physical contact with the garbage can.
A smart bartender for your home
If you are one of the people who He likes the party and the drinks, then this is one of the most ideal projects for you. In addition, this will help you surprise each of your guests since you can offer different types of drinks that are prepared by themselves. Therefore, you will be able to count on a homemade robot that will work for you bar tender, the same is called Drink Robot.
To prepare it, it is necessary to have different bottles of drinks, as well as a hydraulic pump and motorsall this must be connected to a arduino board which will be in charge of ordering all inputs and outputs during operation. When all this project is elaborated, the person only has to press a button so that certain amounts of the different bottles in a glass.
It must be taken into account that several projects of this type can currently be found, so Drink Robot is not the only one you can run, you can also try other options like drinkuino, which is another drink vending machine that works through an appso this time you will not activate it through a switch.
Make a control to watch your favorite series
Without a doubt, to be able to have a control for watch your favorite seriesTo access Netflix oh Youtube from your computer or for change the channels on your tv It will provide you with greater comfort, especially if you are one of those users who likes to watch television before going to sleep or while lying down.
Thanks to the Arduino boards you can create your own wireless controller, it has been created by a user called I look who has made it through a 3d Printer, for this he has used a Arduino Pro Mini board and another Micro, as well as of resistance, diodes, radio frequency transceivers and batteries. With the help of all these materials, he has managed to create a functional controller. There are also other projects that will allow you manage your TV from your smartphone.
A table to listen to music
without a doubt this arduino project will help you give touch of originality to your house, something really amazing with which you will surprise all your friends and family. In this way you will achieve the tables in your living room come to life and even that they can play your favorite music. This is how users will have the opportunity to develop this great project and start using their furniture or tables as sound equipment.
It works by adding a number of led lights and a microphone that will be in charge of collecting all the sounds and sending an analog signal to the board Arduino, who through his algorithm will interpret it and place the sound that will go according to the led lights on. In this way you can not only listen to musicbut all this will go accompanied by a soft light that will make the moment even more unique.
A lamp to know the time
This lamp is intended primarily for the smallest of the house and it is that in general most of the children when sleeping only tend to wake up in the night or early morning and wake up thinking that it is already day, this is because they are still at an age where they do not know read the clock. Therefore, one way to solve this is thanks to the smart lamp to know the time.
In this case, parents should teach them to your children how to interpret the lamp with led lights and so they will know if it is still time to continue sleeping or to get up. To make it, it is necessary to have a Arduino Nano board and a clock circuit, as well as the lamp which will be the one that shows different colors depending on the time. If it offers a Red color this means that still there is a lot of time left to get up, so you should stay in bed sleeping.
In case you are in a yellow color It means that it’s about to dawn so there are only a few minutes of sleep left and if it is placed in green color It means that the time has come to get up. the colored lamp becomes an excellent tool for the children, but also a very good alternative for grown upsso they can get an idea of how much time they have left to sleep without having to look at the clock or the mobile screen to see the time.
Create Darth Vader’s lamp
It is very likely that you have already heard about ikea lamps in form of white sphere furrowed by cracks, which are quite attractive and will undoubtedly decorate any area of your home. Therefore, if you are a fan of the movie of the “Star Wars”, then you should know that many fans of this movie have been designing a lamp with masking tape and paint to imitate said model.
All this in order to create a ribbon lamp that imitates the death star. It is because of that an engineer passionate about electronics I have been using a arduino board nano along with a driver…
Facebook Comments
Disqus