The channel of your WiFi signal is also known as the frequency or signal intensity (Hz), by which the Internet is transmitted to your equipment.
If you are in a place where there are multiple Wi-Fi signals, there may be issues when connecting to your router. An example of this would be constant disconnections or a slow speed.
For this and other reasons it is important to know how to choose a different channel or transmission frequency, to avoid connectivity problems.
How much does channel congestion affect the quality of my wireless Internet connection?
If there are different routers transmitting under the same frequency or on the same channel, this will cause the communication network to become congested and various failures will begin to occur. It is for the same It is very important to observe how many devices exist near your location, and if there are many, switch to a different transmission channel.
This drawback has a considerable influence in places where there are different signals, but transmitting on the same frequency. Therefore, this can generate different failures such as the following:
- Low speed.
- Unstable signal.
- Loss of signal and less coverage.
- disconnections.
- Problems connecting to the network.
Steps to identify the best channel for your WiFi with “WiFi Analyzer”
There is an application for mobile devices that allows you to analyze WiFi transmission networks and see which channels are saturated, this is Wifi Analyzer and it is available in the Play Store. Once you have downloaded it, all you have to do is follow a series of steps then we will show you, so you can get the best channel for your network.
run the app
When the download is complete, the first thing you should do is open it, After it starts you will observe different graphs; the amount will depend on how many WiFi networks are available and within your reach. In the same way you can see the name of each one. But, commonly the one with the greatest intensity is yours.
Analyze the displayed graph
The program will show you a screen with several graphs, This will help you to know which are the channels with the highest saturation and the respective signal strength of the emitting devices.
Choose the right channel
If the graph is hard to understand, don’t worry. This app has a section that tells you in a better way which are the best channels that you can use for your router to transmit the signal.
It tries to identify with stars which channel is better. The more stars it contains, the less saturation it has. It is recommended that you write down on a piece of paper which are the best options, so that later you can identify the best option when changing.
How to change the channel of my router and establish the best and least congested one?
It is an easy process to perform, but you have to pay close attention when doing it. Especially since there may be small differences in the location of the options. This is due to the various brands on the market, so there may be minimal variations.
Follow the steps below carefully:
Log into your router to configure it
On different occasions we have explained how you can access your WiFi router and how to configure it. For this reason, we will leave you here different links where you can observe in more detail the explanation for Y .
However, we will give you a quick summary. To enter your router, all you have to do is enter your IP address, commonly it is: 192.168.1.1. In case it fails try 192.168.0.1. This will place it in the search bar of your favorite browser. (In case none of them work, we invite you to enter the link indicated above so that you know other methods).
Once you have entered the indicated data, You will be prompted to add a username and password. If you have not configured your device at any time, the user must be: admin and the possible password can be: admin, 1234, 0000 or any other depending on the manufacturer. This data can also be found on a label somewhere in it.
Change the transmission channel
Now that you have entered, just look for the section “Wireless networks” or “Wireless”, Here you can change the transmission channel. Your router may be set to automatic or be on some channel.
Now just look for the paper where you wrote down the best available channel, which you observed using the WiFi Analyzer application. once you have it attach that channel and press the “Save” button either Save. Reboot the router (power cycle) to complete the setup.
List of the best applications and software to analyze the channels of my wireless network
In addition to WiFi Analyzer, there are other tools that you can use to analyze the different networks in your area. Note that The importance of these apps lies in knowing which are the channels with the greatest saturation and which are the best options that you can use. Because of this, the program you want to use is important.
Next, we will give you a small list that you can try:
WiFi Monitor – Wi-Fi network analyzer
This is a complete tool with which you can monitor in as much detail as possible the status of your wireless network, as well as other networks near you. Just download it on any device so you can explore each feature.
It has custom tabs for specific functionalities. Each of them has a huge number of sections. But, the one that interests you the most is that of the channels, where you will be able to recognize which ones are saturated.
It works the same way as the one mentioned at the beginning of the article. Although, with a flashier user interface. In the same way as others, it has sections or tabs dedicated to a particular functionality. The most important are the graphics of the channels and the quality of those that are available. These you can observe with a star, the more you have, the higher quality it will be.
Although it is in English, it is quite intuitive thanks to its easy user platform and graphics.
WiFi Analyzer
Although it has practically the same name as one of those mentioned above. It is totally different, not only in the user interface, which is much more striking and tidy. But also allows you to analyze the networks to provide a more detailed analysis of the current state.
5GHz WiFi and how it can solve 2.5GHz congestion problems
High-frequency Wi-Fi transmission networks or 5Ghz, allow a higher speed of data transmission, so you will have better benefits for your devices. In addition to this, they have greater coverage and a large number of channels to transmit. In the event that the channels available on the 2.5 Ghz frequency are saturated, it is best to change the frequency to a higher one.
Note that to perform this task, Your router must be able to transmit on that frequency. Apart from this, the devices that you will connect to it must support the new frequency. So before making any changes, make sure that it meets these requirements.
It is very rare for modern equipment; mid-range and high-end, do not meet them. But, If you have some that are somewhat old or have doubts, you do not lose anything by validating that they can work correctly.
Facebook Comments
Disqus