Sign out of or turn off the Windows PC is always a function that must be performed when doing machine use and that it is generally very simple to use, so anyone can be able to shut down the computer easily.
It is also important to mention that there are many ways to turn off the computer either from the most common way which is through the start menu, keyboard, with voice command, even through a shortcut. All this allows users to have different alternatives to initiate the shutdown of the machine at any time.
However, it is important to mention that as the years of use of the equipment it becomes much slower to turn off, which can be due to many reasons. That is why below we are going to teach you how to turn off the PC, the risks of turning it off incorrectly and how to make it turn off more quickly. To do this, follow in detail everything that we will teach you below.
What are the risks of shutting down the PC incorrectly?
On many occasions when using the computer and you have many open programs or he is presenting problems in the hardware or hard disk usually stays stuck for a few minutes what prevents you from continuing using fluently. All this leads to the user having to perform a forced computer shutdown in order to restart it and use it again.
However, doing this kind of off to machine It is not the most recommended since this could end worsen team health. It is for this very reason that computers have included in their system more than one way to be able to shut down correctlyand, and it is that when you shut down the PC from its own operating system it sends all the necessary tasks to the hardware to make a shutdown ok.
This means that, if you turn off the team in a forced wayboth the programs and all the content that is being running on the machine at that moment they will not close properly, what can cause the damage of the softwares or even risk to damage the hard drive at the software level which is practically impossible to repair.
Therefore, it is best to perform a correct shutdown from the operating system itself once they have finished all processes That are running on the PC. In the event that the equipment is stuck, then you must run the risks of performing a forced shutdown to try to solve this problem.
Steps to properly shut down or shut down your Windows computer
As mentioned above, there are different ways to turn off the windows computer. This will allow you to have at your disposal different methods of closing the PC when some type of problem occurs in the system without it ending up suffering irreparable damage. That is why, here we are going to show you each of the available forms of turn off your windows computer in an easy and fast way.
To do this, follow each of the methods that we will teach you below:
From the start button
The most common way to perform this procedure is through the windows start button and is that this is the most popular way to shut down these types of equipment once they have finished using it.
To carry out this procedure you must perform the following steps:
- The first thing you should do is go to windows start button.
- Once you click on it, a list of all programs installed on the PC, as well as the off button right at the bottom left of your screen.
- Here you must click on it, now you will see three options “Shut down”, “Restart” or “Sleep”in this case you must click again on “To turn off” so that this process can be executed correctly.
From keyboard commands (Alt+F4)
another form of power starting the shutdown process on the PC is through the keyboardin this case you must there are two ways to do itthe first one is by pressing the key combination “ALT+F4”, there will open one new windows window where you just have to click “To accept” to confirm that you want turn off the computer.
The other way you can also close the computer is by pressing the key combination “Windows + X”, this is the same thing to do right click on the button beginning. This will allow you to manually select what action you want to perform if “Shutdown”, “Restart”, or “Sleep”.
Finally, you can also press twice followed the keys “Windows + X” followed by the key “G” so that the process of shut down start automaticallythis will save you from having to choose which process you want to run.
with a shortcut
Another way to carry out this activity is by creating a shortcut for itkeep in mind that this method is much more comfortablesince you simply have to do Click on the icon and your Windows operating system will start to shut down automatically.
In the event that you have a programmable macro keyboardthen you will have the opportunity to configure it and so power assign a button to perform that task. Although on many occasions this can become a double-edged sword, since if you press it by mistake the machine will automatically turn off and all the programs you are running at that moment will be closed.
In order to create the shortcut to turn off and thus perform this function more comfortably, you can do it through the following steps:
- For create the shortcut you must do right click anywhere on the desktop, in the options menu that appears on the screen you must click on “New” and then “Direct access”.
- Now a new window will open on the screen where you must write Shutdown.exe -S” and click on “Following”.
- In the next window you must put the name you want the file to have. Once the name is chosen, you must click on “To finalize”.
- after this you can locate shortcut where you want, for turn off the computer you simply must click on it and automatically this task will be executed.
This way you can start create the shortcut to shut down the computer faster. You can too create shortcuts to carry out other types of activities such as “Restart”, “Log off”, “Suspend”, “Hibernate”, among others. Keep in mind that all these processes are carried out in a similar way.
That is why we leave you the command for each of them below:
- Shutdown.exe -r allows you to restart the computer
- Shutdown.exe -L Sign off
- Shutdown.exe -a allows you to cancel the shutdown in case you have executed it by mistake.
- Rundll32.exe user32.dll, LockWorkStation allows you to lock the computer.
- Rundll32.exe powrprof.dll, SetSuspendState so you can hibernate the computer.
- Powrprof.dll rundll32.exe, SetSuspendState 0,1,0 to activate the sleep or suspension option.
With Cortana voice command
One of the advantages of using the windows operating system is that you can use the Cortana voice commandalthough perhaps for many of the people this tool may not have meaning or many kinds of uses. However, what you don’t know is that through Cortana you will be able to indicate the shutdown of your equipment only with your voice.
It is important to mention that achieving this process is not so easy, but it is possible. And this command is not only going to allow you initiate Shutdown, but you can also indicate to reboot the machinethat is suspended or hibernated.
To carry out this process, you will need to perform the following steps:
- To start you must go to the address of C:\Users\username\AppData\Roaming\Microsoft\Windows\Start Menu\Programs and there you must create a shortcut with the following text “Shutdown.exe -s”.
- East direct access you can call it whatever you want, either “Off” “Close”, among others.
- The next thing will be to activate the command “Cortana” and tell him the name of the shortcut you have chosen. once this command is recognized by the Voice command said will open shortcut and shutdown the PC.
with power button
Another way to be able to apply this process in your windows computer is through power button. In general, this button is programmed in different ways, either for “Shutdown”, “Hibernate” or “Sleep” the team.
To configure this button you will be able to do it through power options, and there you must modify what is the behavior of the button. In this case, if you are in suspend or hibernateyou can switch to turn off. In this way every time you use it your PC will shut down automatically.
Customizing countdown
Finally, another form of power turning off the PC is through a countdown, it can be said that this is one of the methods least used by users worldwide. The way to apply this function is very similar to the one already explained above to create a shortcut, but this time you can add a timer in seconds to the command.
Therefore, to carry out this method it is necessary to carry out the steps that we will indicate below:
- Again you have to create a shortcut applying the same process explained above.
- However, this time you should type the following command “Shutdown.exe -s -t XXX” in this case the XXX they must be changed by the number of seconds that you want to program, for example, it would be as follows: “Shutdown.exe -s -t 120” This means that it will turn off when two minutes have elapsed after clicking on the shortcut.
Learn how to make your Windows computer shut down faster
One of the most common problems with computers is that as time passes and they have more use they become a little slower in their functions, specially in the moment of shutdownwhere the screen lasts a long time to start this process. Can improve the speed of this function It is possible, for this you can do different things.
One of them and perhaps the simplest is close all running programs before starting the system shutdown process. In case this does not work and the computer continues to take time to execute said process then it will be necessary to try another method.
another form of power avoid this delay is changing three of the system registry values. However, you must bear in mind that this process is very delicate, since if you make a mistake in it you could damage your operating system.
That is why below, we teach you how to carry out this process successfully:
- In order to modify these three system values you will need to open exhey there you should go to the following route: HKEY_CURRENT_USER\Control Panel\Desktop
- next thing will be create three entries that allow behavior to be changed flaw…
Facebook Comments
Disqus