【 CONFIGURE Keyboard in Windows 】▷ Step by Step Guide ▷ 2022

It is one of the most important input devices of the computer. This goes beyond the action of performing “point and click”, since it allows us to carry out different functions such as writing, executing commands, using programs and more that require its use. In addition to this, it facilitates the fact of accessing files and functions of the equipment by means of special keys. Which means that its mode of use is optimal and very helpful for certain tasks.

Even though you choose the best of them, keep in mind that these They work through a microcontroller., who is in charge of controlling and sending orders to the team. So there may be times when it fails, which for one are somewhat complicated. But when it comes to looking for why this happens, most of the time it is usually for insignificant things that can be accommodated in seconds.

In general, it all depends on the configuration or the language, so in this guide you can find everything you need to adjust your writing peripheral in a simple way. also what to do when you don’t mark the special characters and much more. If you have any of these problems, this is for you.

Steps to configure the PC keyboard in Windows

When you have a new keyboard, it is not enough to just connect it and that’s it, many times these can present inconvenience, such as, for example, when marking a key or some character, which is why many think that it came with a factory defect and seek to change it.

But the truth is that these come with a predefined configuration and that perhaps this does not conform to what we commonly know. So don’t worry, in this part we will help you set it up correctly, you just have to follow the steps shown below.

To correct this error, the first thing you should do is go to “Start” from your computer and enter “Control Panel”.

Now you must select the option “Watch, language and region”. It should be noted that if you are using Windows Vista, Windows 7 and Windows 10 it will appear like this. In Windows 8 it will output as “Time and language”.

You are going to click on “Regional and language settings” > “Keyboards and languages” > “Change keyboards”.

In this window you should see the languages that your equipment handles, there you must locate “Spanish – International Literacy” either “Spanish – traditional”. This will also depend on the layout of the keys.

You must observe your writing peripheral so that you can see the distribution, everything will depend on where the special characters are, for example, if you have one where the @ symbol is in the “Q” you better select “Spanish – International Literacy” either “United States – International”, since it is used in Latin America. If on the contrary the @ appears in number 2 you must use “Spanish – Spain” Or simply “Spanish”.

Knowing the distribution of certain keys and having chosen the appropriate language, you must click on “To accept”.
Give it a try and verify that you can already mark the special characters. You must bear in mind that for the upper symbols you have to press the arrow key. “Shift”, (represented by an up arrow)and to mark the one on the sides you must press the key “Alt Gr”.

How to change the keyboard language to Spanish in Windows?

If you find yourself with a new computer or with the one you have and you don’t know how to change the language or reset it to its previous settings, Because Windows does not show you how to do it at a glance, in this section we will help you do it regardless of the version you have. Follow the steps so that you can do it successfully.

Windows 10

It is very normal that the language of the peripheral is changed in what is the Windows operating system and is placed in English or any other. That is why in this part you will see how you can modify it and establish the one of your preference.

The first thing you should do is open the “Menu” > “Windows System”.

You are going to head in “All applications”.

Click on “Control Panel”.

You will see that a tab opens, in it you must look for where it tells you “Watch, language and region”.
will appear (3) options you must click on “Language”> “Add language”.

Later, in the same bar where you entered you can see the languages you have. Select the one you want and click “Go up”until you stay as the main one.

windows 7

Misconfiguration is one of the “mysteries” of Windows that often happens to many people and more often than you think. It is not known how but in seconds it can already be totally different from how it was, and sometimes you may not find how to accommodate it without help. In this case, we will be the ones who will tell you how to fix it without calling third parties.

The first thing you should do is go to “Start” > Dashboard” > “Clock, language and region” > “Change keyboards or other input methods.”

Once there select “Change keyboards…”.

When you click you will see a pop-up window that is “Text services/input languages”.
In the section that tells you “Default input language” you must click on the dropdown menu and select a language.

If it doesn’t show you any others, you can add them manually by doing the following:

In the section that says “Installed Services” You will see the language that the keyboard has at that moment, to add another you must select “Add”.

A window should open “Add input language”. Now all that remains is to search for the language you want to apply.

Once the above is done you must select the arrow of (+) that is on the left side of the language that you chose to expand the menu.
This should show you the option to “Keyboard”you will see that a (+) appears next to the word, click on it again to display a submenu.

Now you just have to click on the correct language and “To accept”.
Having done the steps to add the language, you will have to repeat the first step that you applied when entering the pop-up window of “Text services / input languages”.
When you extend the menu you should see the language you added, choose it and click on “Apply” > “OK” to complete the process.

Windows 8

If you have the same faults with this operating system and you still don’t know how to handle it easily, in the next step you will see how to run it. Particularly in this version there is a way to add several languages and change them without having to navigate through so many screens.

The first thing you should do is go to “Setting” from Charms bar or main bar that appears on the right hand side of the screen.

Within this you will look for where it tells you “Time and language” or “Region and language”.

When you click you will see that a window opens, in the language section You must click on the language that you have by default. Done this go to “Options”.

There you must look where it shows “Keyboards”. When you open this a series of languages is displayed, select one of these and click on “To accept”.

Windows Keyboard Misconfiguration Problems and Solutions

Sometimes you are doing something, typing very fast and you don’t look at the keys you can press, and when you come to realize it has been completely misconfigured, not knowing what happened to him or how to accommodate it. If you are going through this, then we will tell you what to do to solve it.

Misconfigured or Changed Keyboard

By this we mean that it does not mark some special characters such as accents, (Ñ) or any other. It always happens that by mistake some keys are pressed that when combined can activate or deactivate the functions. To fix it, follow the steps below.

Go to the main menu and search “Control Panel” > “Clock, Language, and Region” > “Region and Language Options” > “Keyboard and Languages” > “Keyboards and Other Input Languages” > “Change Keyboards”.
Then select “Advanced key settings”. At the bottom of that window you will see an option that says “Change key sequence”.

In that last window that was opened you should see the configuration that you have active. There you can change it or deactivate it so that it does not happen to you again.

A key doesn’t work, appears damaged, broken, or stuck

Keyboards today are not even a quarter of what they were before, since now you will normally find them made of membrane. Although its quality is improving every timeIt always happens that they are easily damaged or get stuck.

If this happens to you, there are some things that can help you to know if those keys work for it or if it is because it is infected by a virus, because these are capable of intercepting the proper functioning of the same.

You should clean it with a CO spray and a toothbrush. You can also buy a special one for these.

If this is wireless, check that the IR / Bluetooth connection is running or change the batteries.
If none of those options help you you only have to use the screen keyboard to mark the keys that are bad.

The computer writes by itself, the keys are pressed, I type but nothing happens

If this is happening to you, nothing is wrong, you may have a virus on your computer or some program that you recently downloaded has caused some damage, you may also have a spyware.

The first thing that these types of programs usually do is search for the most sensitive information, such as credit card numbers or personal passwords. To solve this all you have to do is identify what is affecting your peripheral or your equipment.

run some anti-spy.
try a antivirus.
If you do not have or are not sure of its operation perform a security scan.

How to fix keyboard misconfiguration in Windows?

Has it happened to you that you were working normally and from one moment to the next it got misconfigured without knowing why? If all the signs have been changed and appear in another place that they shouldn’t, don’t worry, in this part you can see how you can make it work as it was before, just follow these simple steps.

go to “Control Panel” > “Accessibility” > “Accessibility center” > “Change the way the keyboard works”.

After having entered the previous option, a window should open where it tells you “Facilitate the use of the keyboard”. Right there you will see that there are a series of items, You must make sure that all the boxes are unchecked.

If there is one selected, delete it and press “Apply and Accept”.
in this way this It has remained as it was initially.

Why can’t I type special characters like @, ~, # and others on my keyboard?

Sometimes, malware influences the downloads of programs that are made on the computer, which is why they often interfere with the configuration at the moment you give the authorization, being perhaps one of the reasons why you cannot write certain symbols. To repair…