【 Create and Configure WiFi Access Point 】 Easy Guide ▷ 2022

Have you ever heard of a ?. In a simple way, it is a wireless device capable of allowing the interconnection between other WiFi devices and wired networks. Its function is to be intermediaries between a computer and a networkeither local or on the Internet.

With them, it is possible for a mobile computing device (whether tablet, smartphone or computer) to connect to a network. In general, they can also be connected to a wired network and help transmit data between said wired network and wireless devices.

For example, if you are using your mobile or laptop to connect to the Internet, you are using an access point to access that network. As you can see, it is a device that is used daily and that very few know about. Therefore, we will talk about how to create and configure a wireless access point Step by Step.

What is an AP or Wireless Access Point and how does it work?

It is known by its acronym in English WAP either PAbecause of his name Wireless Access Point. As we indicated previously, it is a device whose function is to achieve the connection between mobile computing devices, that is, a computer, a smartphone, tablet, etc., with a network.

The connection can be carried out wireless and through a wired network. In addition, they have assigned IP addresses to proceed with your configuration. The most interesting thing is that many APs can be connected to each other in order to create a much larger network for users to access from different areas.

For example, if there is a zone in your house in which does not reach the WiFi signal efficientlyyou can make use of a wireless access point to establish a much broader connection of the signal transmitted by the router to your devices.

Finally, you should know that the AP acts both as a central transmitter as a wireless radio signal receiver. It can be incorporated into a wired router or as a standalone device.

Why install an additional AP in my home? Main benefits

The main reason why installing an additional AP in your home is an excellent idea is because through this device it is possible to obtain a good signal in places where you usually do not have a single router. In summary, helps boost wireless signal in your home and expand it to different areas.

If the distance between the router and the area where you are using your mobile or laptop is wide, the WiFi network may suffer interference and may not reach you efficiently. Hence, the importance of having a wireless access point in your home. Thanks to this, you will enjoy a maximum connectivity regardless of your location.

Added to that, there are many types of AP designed by different brands. Whichever you choose, they are generally very easy to install and set up in your home. Just follow a series of simple steps and you’re done. Later, we will explain a step-by-step guide to proceed with its configuration according to your brand.

Access Point vs WiFi Repeater Which one is better to install at home?

There is another device available on the market that performs a function very similar to that of the Access Point. It is a WiFi repeater. This is connected to a plug and also allows you to extend the Internet network wirelessly or through cables with the help of a port.

The main difference between the two is that the repeater creates a new network, so you will have to change when you are in the low coverage area. On the other hand the AP is considered another router linked to the originalso the network remains the same and the connection does not drop.

In this way, it can be said that the access points are in charge of transmit the original signalwhile repeaters, as their name implies, retransmit the already existing signal.

If you only need to connect a few devices, the WIFI repeater It can work for you, however, if you are looking for a completely fresh and stable network, it is better to lean towards the use of an AP. So, if you are wondering which one is better to install at home? Without a doubt, the winner is the Access Point.

Steps to configure any brand of router as an access point in your home

Next, we explain step by step how you can configure any brand of router as access point in your house in an easy and simple way. In this way, you can do it yourself without having to be an expert on the subject. Follow the instructions below:

Tp link

This is one of the most common brands out there and it’s easy to set up. You just have to pay attention and follow each of the steps that we will specify:

Step 1

Connect your computer to TL-WA501G/TL-WA601G and log in specifically to the web-based utility. Then place the IP address 192.168.1.1 in the web browser.

Step 2

To avoid IP conflicts, change the LAN IP address of the access point (TL-WA501G/TL-WA601G). After changing the IP address of the access point, log back into the access point with the new IP address.

Step 3

Proceed to set wireless mode with the client and connect to the wireless network. The specific steps to do so are:

• Click on “Wireless” (Wireless). Then go into Wireless mode on the client located on the left and select. If the router or access point you are connecting to does not support WDS, do not enable the WDS option.
• In case you know the SSID of the wireless network or the MAC address of the AP, you can enter it in the corresponding AP box manually. After that, select “Save”.
• You can also click the button “Survey” (poll) to observe the available wireless networks. Then select the button “Connect” and ready. Then enter the “Connect” button, and it will automatically display in the client mode box, the network SSID and MAC address of the AP.
• When the setup is finished, you can reboot device. But first you have to click “Save” for the settings to take effect after rebooting the device.

Asus

• Connect the AP router on the Wan port to the LAN port of the router/modem.
• Log in to the user interface on the router. Select “Management” (Administration) and then “Operating mode” (Operation Mode).
• Select the AP mode and click “Save”.
• You may get LAN IP automatically or manually. To do it automatically: Set Automatic IP Address (Yes). To do it manually: Set Auto IP Address (No), then manually fill in the LAN IP, Subnet Mask, Gateway and DNS.
• Proceed to set the network name (SSID) and the password for the new wireless network.
• Click on “Apply” (Apply) to save the settings.

Finally, keep in mind that in access point (AP) mode, the IP address assigned by DHCP is changed. Therefore, it is recommended install and use Device Discovery Utility in order to find the IP address of the wireless router.

net gear

Before explaining the configuration, you should know that the AP provides WiFi and LAN connectivity. However, you should not directly connect the access point to an Internet modem. Instead, you must connect it to a router that is connected to an Internet modem.

The configuration that we will give you is specifically for the model WAC104.

Step 1

Connect the Ethernet cable included in the package to one of the Ethernet ports of the Access Point. In these cases, you can use any of the four built-in LAN ports.

Step 2

Proceed to connect the other end of the cable to a LAN port on the router.

Step 3

Turn on the AP on the power indicator. To verify that it has been turned on, the button illuminates solid green. If this doesn’t happen, press the power button again.

Then, you have to wait for the WiFi indicator to also light up solid green. If not, you need to press the WiFi on/off button.

Step 4

Log in to the AP from a wireless device (tablet, computer, smartphone, etc.). To enter, you must follow the following address http://www.aplogin.net. Subsequently, enter admin as the username and password as the password. Then the web management interface of the access point will be displayed.

step 5

Set up basic WiFi network and security Of the same. For them, follow the steps below:

• Enter in Setup/Wireless Setup (Settings/ Wireless Settings).
• Set the AP name, SSID, region, and a security option. When it comes to the region, you cannot select the United States or Canada. Other than that, you need to make sure that the country is set to the region in which the device is operating.
• Click on “Apply” (Apply).

In case you want to know more about the subject, you can consult the user manuals provided on the Internet by Netgear.

Huawei

The configuration that we will explain is for the Huawei HG532c router:

1. press the reset button, to set the factory settings. To do this, you have to keep the reset button pressed for about 15 seconds, until the lights on the router change.
2. Connect the router to the computer via a network cable.
3. The router will throw you a IP address (192.168.1.1). To access the router’s settings, you just have to type that IP address into the browser.
4. Write both username and password the word “admin”.
5. Disable DHCP in the LAN settings section.
6. Enter the link: http:// + IP address + /html/ntwkall/wan.asp.

then you have to delete all existing entries and create a new one with the following parameters:

• Link Type: DSL
• WAN connection: Enable
• VPI/VCI: 8 / 35
• List of services: INTERNET
• Port Assignment: LAN1 and SSID1
• Connection Type: Bridge
• DHCP transparent transmission: enable or Enable
• Type of service: UBR without PCR
• Encryption mode: LLC

All other fields are blank. Then click on “Send” and ready.

Cisco

We will explain how to configure the access point with a PC that is directly connected to the Cisco AP541N:

Step 1

Turn on your PC and if you haven’t, proceed to change the PC IP Address to make sure it has an IP address from the same subnet. In case you don’t know how to do it, follow these steps:

• Go into Start (Start) in case of Windows PC and select Settings (setting). Then go into Dashboard control (control Panel).
• In the dialog box Control Panelclick networks (net).
• within network, select TCP/IP for the Ethernet card of the PC. After that, click Properties (properties).
• Within the IP Address window, click Specify an IP address (specify an IP address).
• Enter an IP address that is on the same subnet as the access point’s IP address. (The default address of the AP is 192.168.10.10.) Then you can set the command to 192.168.10.250and for the…