Computers are today one of computer equipment most used at present, they need to work under certain operating conditions in order to ensure optimal performance. Therefore, being able to maintain a good cpu temperature It is essential to be able to maintain the optimal conditions of the equipment.
It is possible that at some point you have noticed that your CPU starts to heat up after a run time. Usually, when this happens, the computer begins to behave strangely, either blocking certain tasks, slowing down, or even presenting hardware problems.
Luckily, power Knowing the temperature of a CPU is a simple task to achieve. In this way, here we are going to teach you how to measure the temperature on your computer in a very simple and fast way.
Why is it important to constantly monitor the temperature of your computer?
Being able to know the temperature in which the computer is located is very important, since, if we can verify that it is working correctly, we can extend the useful life of the equipment, as well as improve its performance and prevent it from presenting system failures. Therefore, to ensure that this is the case, it is necessary to carry out a equipment maintenance or adequate refrigeration and this way avoid possible damage.
As usual, internal temperature of the computer is usually much higher than external temperaturethis is due to a large number of elements of electricity that are inside the cpu and that with the passage of time they generate heat release, what is now known as the effect “Joule”.
This is how these devices are designed to work at certain temperatures, whereby the higher temperatures to the already protracted ones they can reach irreversibly damage the devices. That is why the importance of power constantly monitor these factors and thus avoid possible overheating that may affect the useful life of the equipment.
Steps to measure the temperature of your CPU in Windows, Linux and MacOS
Considering how dangerous these can be computer overheatinghere we are going to explain Step by Step how can you start measure the temperature in your machine.
It is important to mention that these problems are often generated in operating systems of Windows, Linux and MacOS. Because of this, here we are going to explain how to carry out this process in each of these operating systems, To do this, follow each of the methods that we will teach you below:
on windows
In the case of windows operating systemBeing able to know the state of the equipment’s temperature is very simple. For this there is a lots of software on the market which will be in charge of giving you a very complete report of the heating up your CPU.
In this case, we want to introduce you to some free programs that are very easy to use and with which you will achieve very positive results. Therefore, first of all, we will use Core Temp software to perform this method, To do this, follow the steps that we will explain below:
- The first thing will be to install the software Core Temp on the computer (later you have the download link).
- Once installed on the machine, Core Temp show us in the task bar the temperature in which the computer is located. In this way, you can know and check constantly each of the cores of your processor, thus avoiding possible overheating.
Another of the most recommended programs to carry out these processes in Windows is HWInfolike Core Temp We can also download it completely free and which offers a little information more complete and detailed than the program mentioned above.
To do this you will simply have to perform installing the software on your machine and with a few clicks you can check overheat status what’s wrong with it the processor, RAM, hard drive, graphics card, fan speedamong other elements.
Finally,HWInfo You can download it for free as we already mentioned, but you can also acquire your license and so use its paid versionwhich will provide you with tools more advanced and better control about each of the elements that make up your computer.
on macOS
In the case of the macOS This process is carried out in a very similar way to that of windowsthat is, it will also be necessary to make use of third party applications to Know and improve the team’s heating status.
Therefore, Here we are going to show you the two best programs to perform this procedure on your MacOS computer:
VitalSigns 2 or Vital Signs
The first program that we present to you is about Vital Signs 2 only available for the Mac for free. With this version 2 you can start configuring each of the parameters to monitor and at the same time have one further customization.
Therefore, the first thing you have to do is enter your Official site and perform software download. Once installed it will show you in OS side notification bar. With it you can start to control only three variables of the equipment:
- speed of the fans.
- The use of RAM memory.
- CPU temperaturecasing, vent and memory.
iStats Menus
This is another of the most recommended programs for macOS usersit is characterized by offering a large amount of detailed information on each of the temperatures of the different components of the equipment. Therefore, it becomes a very good choice for monitor computer and prevent himself from being seen affected in performance.
One time downloaded and installed on your Macyou need to make sure that the “Sensor” is activated, you can see this from the menu bar where an icon called “SEN”, there you click and all will be shown the states of the different components of the machine. However, it should be mentioned that unlike the other software this one is of payor, and has a 14 day trial period.
on linux
In the case of linux computers It is very important to keep these parameters in their normal states in order to ensure a proper functioning of each unit of the equipment, either the one of processor, RAM memory, graphics card, among others.
Keep in mind that heating problems can be caused by different factors such as deterioration in contacts, fans, among others. Bearing this in mind, here we are going to teach you how monitor temperature in linux operating system.
We install the libraries
The first thing will be install the libraries which are the ones that allow detect the different sensors which are located in motherboard and processor.
- For its installation we must enter the following command: sudoaptitudeinstall Im-sensors.
This process is very similar to the method for detect disk sensors Lasted. In this case we have to install the “hddtemp” in a terminal, The command to use in this case is the following: sudoaptitudeinstallhddtemp.
While starting to carry out the installation of the command hddtemp We are going to see a series of options to choose from, here we must select the ones that are default in ubuntuwe write them and press “Enter”. The following question will also appear on the screen “We want to run the hddtemp command at startup”, which we respond with a “Yes”.
Once we have the libraries, the next thing will be to make our operating system be able to recognize sensors on the computer with the following command: sudosensors-detect.
Here some questions will be displayed on the screen where we have to select the option recommended by the system. Keep in mind that at the end of the process another question will appear where you have to indicate if you want to add the lines shown above, here you must answer Otherwise, In this case, it is best to answer “Yes” so that this is done automatically when the computer restarts.
Monitor CPU temperature
Once all of the above is done, the following will be monitor temperature via command “sensors”. Keep in mind that you can also do it by installing psensor, an app found in software center and which will offer you the temperature graphically. For install psensor enter the following command: sudoaptitudeinstallpsensor.
Tips to prevent your computer from overheating and extend its useful life
It is important to take into account the importance of temperature for the life of the computer. Therefore, it is very important that we can give you the best handling possible so that prevent the computer from overheating and suffering irreversible damage that could lead to the equipment stops working.
With this in mind, here we are going to give you some tips so you can avoid these possible overheating and extend the life of the computer.
However, before we want to leave you a list with different temperature values and their meaning, this will let you know how the equipment is working:
- Less than 60°: The computer is working correctly.
- Between 60° and 70°: The machine is still working properly, but is starting to suffer heating problems. In this case it is recommended to check the fans and clean them.
- Between 70° and 80°: In the event that it is not being done overclocking must be check the fans to know if they are working correctly, it is most likely that they present some kind of problem.
- Between 80° and 90°: If the team comes to have these temperatures wants to indicate that it is suffering severe overheating problems. Most likely, some of the fans have completely stopped or has deteriorated. In the case of laptops, they can reach these temperatures when they are running very heavy games and performance drops. Temperatures above 85° are dangerous.
- Greater than 90°: If your team reaches this temperature surely already will have stopped working and may have burned, causing a irreversible damage in the same.
With this clear, here we show you some tips to keep in mind to avoid these possible overheating in machines.
Do good maintenance
The first thing we must do is perform a constant equipment maintenance this consists of constantly clean the dust that falls on them. In general, all this dust and small debris tends to accumulate in fans and heatsinks, making them start working again forced way thus reducing refrigeration capacity.
The most recommended and perhaps the most important thing to prevent this is to clean as much fans as heatsinks from time to time, for this you can use pressurized air, brushes, brushesamong other elements that allow this to be carried out.
increase cooling
In…
Facebook Comments
Disqus