One of the biggest fears of modern digital users is undoubtedly the loss of important information. Although USB memories and DVD’s They are an excellent way to store information and be able to take it everywhere, there is also the risk that it will be lost due to various factors..
Fortunately, all disks store certain data from the files that are saved on it, which makes it possible to save the information inside. For this it will be necessary to use an external software.
In this article, we are going to teach you how to recover all the files, photos and videos deleted from your drives on Windows and Mac.as well as for any other storage space you have.
Steps to recover all deleted files, photos and videos on your Windows or Mac computer
To recover the deleted data, you need to use a software. There are many on the market, but we are going to teach you to work with which is one of the most powerful and complete on the market.
Recover files deleted from the recycle bin when it becomes empty
EaseUS Data Recovery Wizard it allows you recover those files that have been deleted from your recycle bin after emptying it. Once you have installed the program, the steps you must follow are the following:
- Open EaseUS Data Recovery Wizard.
- At the bottom of the interface you will see the section “Specify location”, in which you must select “Recycle Bin” and subsequently “Scan”.
- You should wait for the program to analyze the location. Upon completion, it will show you a list of all the files that can be recovered.
- Select the files you want to recover and click “Retrieve”.
- Specify where you want the files to be restored and wait for the program to execute the command.
This last step may take time depending on the amount of information you want to recover. Namely, if you recover a 100MB video it will take less than if you do the same with a 2GB movie.
Accidentally deleted data recovery
One day you may have so many files in a folder that while trying to make room you accidentally delete some of the most important files. EaseUS Data Recovery Wizardit will allow you to recover these files in most cases.
In order for the success rate to be higher, it is recommended that you use the tool as soon as possible.since the more time passes since the deletion, the more difficult it is to recover them.
What you have to do is simply the following:
- Open the program and click on the disk in which the data was stored.
- Choose “Scan” and wait for the parsing to finish.
- Finished the above, you must use the folder list on the left side of the interface to enter “Deleted Files” and then select the exact location where the data, photos or videos were stored.
- Now select the files you want to restore and click on “Restore” to then indicate where you want them to be restored.
The process of scanning a disk may take a while depending on its capacity and the features of the computer on which you are working. Normally a 500GB disk usually takes between 1 or 2 hours.
Fortunately, the program shows the recoverable results according to the time they have been deleted. So if what you are looking for was recently deleted, it will be among the first to show up.
Recover deleted data from damaged external hard drive
If you have a colleague or another team with a damaged hard drive with important data, you can use EaseUS Data Recovery Wizard to recover it. This is one of the most used functions of the software, being also the one with the highest percentage of success.
To achieve this, the steps you have to follow are the following:
- Connect the external drive in the corresponding reader of your computer.
- Now you must start the EaseUS Data Recovery Wizard and select the disk you want to analyze and then click on “Scan”. External drives appear at the bottom in the “external drives“, in which will be the one you have previously connected.
- Depending on the size of the disk, the scan may take a few minutes or a couple of hours. On the left side of the interface you will see all the folders contained in it. You must navigate through them to find the files you want to recover.
- Once you have identified the files you want to restore, you simply have to click on “Retrieve” and select the path where you want the recovered data to be saved.
Another thing you can do is try to repair the failed disk before proceeding with data recovery. Hard drive errors or failures are often related to software or system factors, so they can be easily recovered. One of the ways to do this is with the Command Prompt.
What you should do is the following:
- At start write “Run” in the search bar at the bottom and click on the first option that appears.
- Once the terminal is open “Symbol of the system”write “chkdsk” and press Enter. This will show you all the errors on each of the drives connected to the computer.
- Now write chkdsk D: /f/r/x (the “D” varies depending on the location of the disk you want to repair) and press “Enter” for these errors to be fixed.
With this you should be able to normally access the information contained on the disk in question. Otherwise, the error may have leaked to a hardware error or malware.
Restore any file after performing a disk format
Another very common scenario is when a system failure occurs that forces us to format without the possibility of recovering the information stored on the computer. This is something very alarming since once it is done there is no going back. Fortunately, this software gives you a hope to change your luck in this situation.
What you have to do is the following:
- Open the software again and select the formatted hard drive partition that contained the information you want to recover.
- Once identified, click “Scan”.
- Wait for the disk to be scanned and in the “Deleted files” navigate through the different folders until you find the information you want.
In this case, since when doing a hard reset all the information is erased at the same time, you will have to wait for the disk to be completely analyzed. On the contrary, You may check the folders and the files you want are not therebut this does not mean that they cannot be recovered, just that they have not yet been found by the program.
Recover files, photos and videos from a lost drive partition
It can happen that after a format or due to some system error, a partition of the main disk is lost, which also makes all the files contained in it disappear. EaseUS Data Recovery Wizard also allows you to recover this information.
To do this you will have to do a full analysis of the disk in question, which depending on its capacity can take a long time, but it is the only way to do it.
The steps to follow are:
- Open the EaseUS Data Recovery Wizard and select the disk that the lost partition was on.
- Now click “Scan” and wait for the program to scan the storage device completely.
- Then browse the folder list on the left side of the interface and enter “Deleted files”where there should be a folder with the name of the lost partition.
- Go into it and find the files or folders you want to recover and click on “Restore”.
- Select the location where you want these to be restored.
What type of files deleted by mistake can we recover on our Windows or Mac computer?
Regardless of whether you are using Windows or Mac, with this program you can basically recover any file or archive that has been deleted from your computer. Here is a list of all of them categorized according to their nature:
- Document files: DOC/DOCX, XLS/XLSX, PPT/PPTX, PDF, CWK, HTML/HTM, INDD, EPS, etc.
- Photos and images: JPG/JPEG, TIFF/TIF, PNG, BMP, GIF, PSD, CRW, CR2, NEF, ORF, SR2, MRW, DCR , WMF, RAW, SWF, SVG , RAF, DNG, etc.
- Video: AVI, MOV, MP4, M4V, 3GP, 3G2, WMV, MKV, ASF, FLV, SWF, MPG, RM/RMVB, MPEG, etc.
- Audio: AIF/AIFF, M4A, MP3, WAV, WMA, APE, MID/MIDI, RealAudio, VQF, FLV, MKV, MPG, M4V, RM/RMVB, OGG, AAC, WMV, APE, etc.
- Email Files: PST, DBX, EMLX, etc. (For Outlook, Outlook Express, etc.
- Other types of file extensions: (ZIP, RAR, SIT, ISO etc.), exe, html, SITX, etc.
System Requirements to Install “EaseUS Data Recovery Wizard”
The EaseUS data recovery wizard is a powerful program but quite simple in its structure, since it is in charge of executing processes that you could already do manually in a more complex way. That is why you will not need a team with very high performance to get it running.
EaseUS Windows version
The requirements that EaseUS demands from its users to be able to run this program are the following:
- 1 GB of RAM.
- 34 MB of available disk storage.
- 1 Ghz processor or higher.
- Windows Server 2003 or higher operating system.
These are very basic features that can currently be surpassed by even the simplest smartphone on the market, so it is more than likely that your computer complies with them.
EaseUS for MacOS
The requirements to install the EaseUS Data Recovery Wizard are as follows:
- 1 GB of RAM.
- 34 MB of available disk storage.
- 1 Ghz processor or higher.
- MacOS 6 operating system or higher.
These are also features that any Apple computer developed after 2005 can cover, so it is more than likely that your current Mac can run this software without any problems.
Comparison of EaseUS Data Recovery Rates and Prices
EaseUS Data Recovery Wizard allows you to enjoy a free trial version that will help you perform basic recoveries. But if what you are looking for is something foolproof that allows you to find even the lost city of Atlantis, then it is best that you pay for some of their plans.
Below we present the main plans of the company with their prices and advantages in relation to the others:
Data Recovery Wizard Free
This is the most basic plan of the company with a joint license and a transfer limit of 2GB. Namely, you can only recover files that do not exceed that storage space. Despite this, it provides you with improved data loss solutions and the ability to import or export the scan results.
Data Recovery Wizard Pro
This is the second plan of EaseUS Data Recovery Wizard. It offers all the benefits of the free plan, with the obvious advantage of not having a transfer limit and to be able to recover all the files that we want without any problem. It costs around €66 and is an individual license.
Data Recovery Wizard Pro + WinPE
This is the plan more…
Facebook Comments
Disqus