Google Chromecast is a small HDMI device that allows you to send the signal from an Android device to a television. It has a wireless connection that, by connecting to the same network as a smartphone or tablet with the same operating system, allows the content to be displayed on the screen to which it is attached to be sent through an application .
This small device is mostly used on occasions that you have a video in the terminal and you want to enjoy it on a bigger screen or, in the same way, a series of photographs or music that can be had on a tablet. Its mission lies in turn televisions into large multimedia centers starting from the use of another android device which is responsible for sending the signal at all times.
Its functions improve little by little, but for this it is necessary to have the most recent updates. If you run into problems and are looking for how to update google chromecast to the latest version available, we give you the answers you need in this step-by-step guide. We explain what you have to do and we also explain how to access the new updates before anyone else.
Steps to install and update Chromecast to the new version
As usual, updates automatically reach these devices so the user doesn’t have to do anything. However, if Google releases a new version or patch and your device doesn’t receive it, then you should follow these Steps to install and update Chromecast to the new version.
Next, we leave you all the instructions that you must carry out to achieve it:
1 – Save the IP address of your Chromecast
Turn on your device with Chromecast and once it’s booted up and initialized, open the app Google Home to be able to access the device configuration data.
Now go to the section “Devices” and click on it to continue. You will then see a new screen open. Here, you have to click on the button with 3 vertical dots and, within the drop-down that appears, click on “Setting”.
Now, go down through the sections until you reach the “Information”. Look at all the data that appears and stay with the numbers that are next to “IP adress”. There are 4 groups of digits that normally begin with “192”. Copy them all, you will need them.
2 – Turn on your PC and log in as administrator
After having fulfilled the previous point, you have to turn on the pc, since you need it to continue. When the operating system loads, make sure to choose an account that has administrator permissions or that it is directly the administrator. You can see from here.
Since we are going to have to modify system parameters and make certain adjustments, it is important to use a user of this type, since otherwise nothing can be done or windows will not stop appearing asking for passwords.
3 – Open PowerShell and enter the necessary commands
When you are already inside the system, you have to click on the menu button “Start” and, in the search bar that appears, enter the following: “PowerShell”. A string of results will appear in which you must click on the one that corresponds to the program we are looking for, it will match exactly what you have written.
*Note: in case you use Windows 7 or any version of Windows 8/8.1, you have to enter a command inside this program to enable all its capabilities, it is the following: “Set-ExecutionPolicy RemoteSigned -Force” (without quotation marks).
Now, inside this command window, what you have to do is enter this entire string of code What are we going to tell you? You must write the IP that we saved in point 1 in the field that we indicate:
Invoke-WebRequest -Method Post -ContentType “application/json” -Body ‘{“params”: “ota foreground”}’ -Uri “http://IP HERE:8008/setup/reboot” -Verbose -UserAgent “curl”
Done this, press the key “Enter” and start a process Download and update the firmware on the Chromecast. If it doesn’t, restart from the program Google Home and try again.
In case you use Mac or Linux instead of Windows, you have to repeat all of point 1. However, in point 2 do the following:
Mac/Linux – Open the command console and run the code
If you are using a Mac:
Once it is started you must go to “Finder” and click on it. Then click on “Applications“, in “utilities” and finally, double-click on “Terminal”.
If you are using Linux:
When you are already inside the desktop, you just have to press the key combination “Ctrl” + “Alt” + “T” or, if this doesn’t work, “Windows” + “T”. Another possibility is to look in the toolbar and open the console.
Now, inside this new writing window, enter the command What are we going to tell you? Remember to put the IP where we indicate it:
curl -X POST -H “Content-Type: application/json” -d ‘{“params”: “ota foreground”}’ http://IP HERE:8008/setup/reboot -v
How to download and force new Google Chromecast firmware updates?
Like we have already said, to download the new Google Chromecast firmware updates nothing needs to be done. As long as the device is correctly connected to the network and has no problems, the patches and updates will be downloaded and installed automatically, without having to interact, unless the user is asked for confirmation.
If it fails, you can follow any of the procedures explained in the previous section. Although, if you prefer, you have the option of enroll in the advancement program to receive much newer versions, which are not available to normal users.
If you want to enable this possibility, follow the steps that we are going to indicate now:
- With your Google Chromecast connected and activated, and the application “Google Home” open, click inside the section “Devices” to move on.
- Now, you have to click on the 3 circles They are placed in the column at the top right. A small dropdown panel will open.
- Within this menu, you have to press the option “Setting” to access all device settings.
- Once you are inside the section of “Device Settings”Scroll down until you see a section called “Advance Program”. You have to click on it to advance.
- Now press the buttonJoin the program” and activate or deactivate the option of “Allow email notifications” so that the team notifies you every time there is a new update.
- After doing this, you will probably have to write the data of your. Put the email or associated phone number and the access code in the fields that appear, in case you are asked for the data.
- Now, just click on “It is understood” within the warning message and you will already be part of the “Advance Program”.
From this moment, newer updates will be installed automatically, even those that are of an experimental nature. This can sometimes cause installations to arrive very quickly or that sometimes everything does not work as it should; although in most cases what will happen is that your updates will be installed days or even weeks before other users.
Facebook Comments
Disqus