【View System Information in Windows 8】Step by Step Guide ▷ 2022

Many times We need to know in depth certain specific information about our computer and we don’t know exactly how to access it. In the case of Windows 8there are many alternatives that you can go to to know this type of data.

Details regarding what graphics card do you usethe amount of RAMthe IP adressdata of your motherboardetc., you will be able to obtain them using the tools incorporated into your computer or through the assistance of external programs dedicated to it.

if you want to learn How to see the information of the Windows 8 operating system of your computer? We invite you to continue reading this step-by-step guide. You will be able to access common data and others that are a little more specific, along with their characteristics.

Learn step by step to see the system information of your PC with Windows 8

If you need to know exactly what version of Windows is running on your device, you can do it by carrying out a series of very simple steps. First of all, you must press the key Windows+Rthen write Winver in the box corresponding to Open and finally click on To accept.

In case your computer is running Windows 8.1 or Windows RT 8.1, the way to get more information is as follows:

• If the equipment is tactile, swipe in from the right edge of the screen. go to Setting and select in Change PC settings. Continue as indicated from step 3.
• If you use a mouse, locate the pointer in the lower-right corner of the screen, and move it up. Select in Setting and finally click on the option Change PC settings.
• Enter in PC and Devices/ PC Information.
• on windowsyou can take a look at both the edition and the version of windows that your computer is running.
• Specifically on PC/ System Typeyou will be able to know if you are running a version of 32-bit or 64-bit Windows.

Discover step by step how to see more important information about your PC

know the technical specifications of your computer can be very important if you want to carry out certain configurations, or even for . In the case of Windows 8, you can access different sections where you will get important information about your pc. To enter these data, you can do it through the Windows native tool or by using external applications.

Below we show you the steps to follow to learn more about your device through the System Information section:

• Press the key Windows+R to show the box Run.
• Inside it type the command “msinfo32” and press on To accept.
• A window will be displayed where you will know in detail all the components of your system. Go to the left column and select the option System Summary.

IP adress

Know her IP address of your computer It is easier than it seems to be.

The steps to follow for the Windows 8 version are the following:

• Click on the windows key to access the Home screen.
• Write “cmd” inside the browser and press Enter.
• This will make the application run Symbol of the system. Inside it, type “ipconfig” and press Enter again.
• In case you are connected to Wifitake a look at the section Wi-Fi Wireless LAN Adapter, specifically where it says IPv4 address. Right there, you will get the local IP address of your PC.

Performance of your CPU

For those users who want know much more specific information about your devicesAs the performance of your CPU, one of the best options is to use external tools. Most of them are free and portable, which means that they do not need to be installed on the computer. We recommend the CPU-Z tool. To obtain it you just have to click on the following link:

Then you will have to accept the agreement and press on Next on the next three pages. It should be noted that in one of them they will ask you if you want to have a shortcut on the desktop. When the installation is complete, you can run it to start working with it. When you open it, you can see different tabs that correspond to different components. When entering CPUyou will have in your hands all the information of the process and its nuclei.

RAM

to know exactly How much RAM does your Windows PC have?You can also do it in two ways. Directly from the system or with the help of external tools like CPU-Z, Speccy, etc.

The procedure for obtaining this type of information is as follows:

• enter the menu Setting of your device. To do this, you must select the Settings icon located at the bottom of the notification panel or in the left column of the Start menu.
• The window will be displayed Windows Settings.
• Click on the section System that has the icon of a laptop.
• In the column on the left side, select the section of About.
• There you will find the category of device specifications. Find the parameter RAM installed and its right side shows the number of gigabytes of RAM you have.

motherboard

For detailed information regarding the motherboard of your computer, you can again resort to the help of external tools. However, it is also possible obtain these data using the equipment itself.

In this sense, we will explain how to do Windows commands through the console:

• First you must take out the command console, pressing the Windows keys + R.
• In the window that opens, you must write “cmd” and press Enter.
• Now it’s time to write “wmic baseboard get product,manufacturer,version,serial number” in the command console. It is essential that you write the code as is, without spaces between the commas.
• press Enter.
• Once this is done, the system itself windows will detail the Information regarding your motherboard.

This method can be a bit confusing for users who are not used to programming or who enjoy a more user friendly interface. Therefore, if you are this type of user, we suggest you go to other tools such as CPU-Z.

Graphic card

Yes you need this information, there is a very simple method to access. Thanks to this, Not only will you have access to the data related to your graphics card, but you will also know other basic components of your computer such as what processor it uses.

The step by step is as follows:

• Go to the search option and type in the box “dxdiag” without the quotes.
• It will show the window information collected by DirectX, where you can take a look at a complete description of the system. This includes:

• Name processor and graphics card.
• Speed with which the processor works.
• Version DirectX installed.
• RAM total.
• Motherboard name and BIOS that is installed on the computer.
• Version Windows.

Finally, we remind you that it is a procedure that also you can do it with the help of free tools and very easy to use CPU-Z and GPU-Z. The positive thing about them is that they are not only in charge of identifying the components, but also of detail the characteristics of each of them.