【 Burn ISO Image for Raspberry Pi 】 Step by Step Guide ▷ 2022

For fear of complicating, someone might prefer buy a micro SD card that comes ready with the settings to install it to the for example. Nevertheless, recording an image does not have to generate fear. As in any process, there are steps to follow and these steps are not complicated.

Remember that, for the board to work properly, it needs have the operating system installed and since you don’t have a hard drive, the micro SD card is the only storage medium available to be able to achieve it.

Next, we will tell you what these images are that you must copy, what function they fulfill, how to record it without any type of error, and you will learn about a couple of applications that will make your life easier along the way. The best is that, if you propose to follow the step by step to the letter, you will be able to finish the task successfully.

What are the most common mistakes when burning an ISO image for the Raspberry Pi?

As the Raspberry Pi upgrade progresses, new tools come out that facilitate the configuration work. But if they are not used properly, we make mistakes that prevent us from putting it to work.

Take note of some common mistakes when recording an image:

• Copy an image from Windows Explorer and paste it onto the micro SD card.
• Have an SD card that is not class 10.
• Copy the image to the card without having previously formatted it.
• Install without having the updated operating system or use an older version of the image that does not correspond to the Pi.
• Upload the file without decompressing.
• Using an application that does not correctly save the OS image.
• Press the button in the application Read instead of write. This causes the system image to be lost.
• have the file “IMG” with some blank space in its location.

Learn step by step how to burn an image on a Raspberry Pi from scratch and without errors of any kind

An image is the combination of the operating system and applications in a single file that allows the Raspberry Pi to start when we turn it on and it has the micro SD card inserted, loading all the programs that are needed for its operation.

This picture must be recorded with the extension “.img” which should be interpreted as a boot disk by the micro computer. Sometimes, for reasons of space, the files are compressedin that case it’s time to unzip and extract the file and then put it on the card.

We’ll show you how to burn an image using one of the following three apps:

with berryboot

berryboot is a program that works as installer and bootloaderoccupying less space, installing several operating systems simultaneously and can even be used remotely.

To record the image, you must follow the following steps:

• Download and install the latest version of berryboot.

• When you open the app, a welcome screen appears. Here we must giveAnd it is” to the video option and “Wired” in Network, in addition to setting the country where you live. At the end you click on “Okay”.
• At this moment, the options of where we want the system to be installed appear. Select the SD card. To do this, we must remember the name it has. We give the end in “format”.
• Select the system to operating and install according to the available options or, failing that, add the one of your preference.
• Once you click on “To accept”, will begin the process that will last a few minutes and when finished, it will show us the operating systems that have been installed.

We already have the card ready, what is missing is custom the.

with NOOBS

The name NOOBS stands for “New Out Of Box Software”, a reference in english to a beginner. Beyond that, it’s a useful tool for installing the OS to the Pi, also from the micro SD card with a minimum available space of 4Gb.

The way to do the installation is very simple, you can achieve it easily and quickly by following these steps:

• The first thing you should do is download NOOB.

• format the card by inserting it into a memory reader. Go to “My PC”select the option “Format” and leave the values ​​as they are. Just make sure the format is “FAT 32”.
• unzip the file where the NOOBS and drag it to the card. When they finish passing the files, you can take it to the Raspberry to configure it.

With Raspberry Pi Imager

This software is developed by the creators of Raspberry for the purpose of assist users in installing the operating system. It is compatible with the current versions of the device and is open source, available for both Windows, Linux and Mac.

To record the image, we follow the following steps:

• Download the latest version and we install it on a computer with Windows, Linux or Mac.

• After, we execute the program and we find the welcome interface.
• Touch to choose the operating system that we want to installwe click on the option “Choose OS” and a list will be displayed with those that are available.
• Select the operating system that you prefer
• Next, we choose the device in which we are going to install it. we played on the name corresponding to the micro SD.
• Once let’s choose the system and storage locationthe option “Write”. We click and the copy will begin.
• Must be wait for file transfer to finish. At the end of copying, the tool itself verifies that everything is in order and will inform if it is correct.
• Click on “Continue”, we extract the memory card. Now we have to take it to the Raspberry Pi.

It is necessary to highlight that this simple program is very fast and, with the new configuration system that it includes, a window opens in which you can choose the name that you want to assign to it, the Wi-Fi data, the time zone where you are located and if you want to accept connections via SSH. Items such as sound playback after completing a task and memory card ejection can also be left ready.

As you have seen, we have no reason to run away to burn the image for use on the Raspberry Pi. The steps are simple and the friendly interface of the tools helps to meet the requirements. In the case of the three tools mentioned and described above, what we must do is install the monitor, keyboard and mouse on the Raspberry, and make the necessary configurations so that they run without problems.

Each one has its particularities, so it is up to you to choose which one suits you. In popularity, the first place is taken by NOOBS, which shows a full and a lite version. For his part, BerryBoot it allows you to install even from a USB device and has HDMI support. Finally, in the case of Raspberry Pi Imagerbeing the brand’s own application, offers the peace of mind of being fully compatible and adjustable to the devices.